Remove/install crankshaft position sensor

AR07.04-S-0059PS

Remove/install crankshaft position sensor

13.06.2018

Engine

642 in model 470, 471

1

Screw

2

Heat shield

3

Screw

4

Spacer

5

Crankshaft position sensor

Topical note

Information on preventing damage to electronic components due to electrostatic discharge

AH54.00-P-0001-01A

Topical note

Notes on avoiding damage through contamination and foreign objects

AH00.00-P-5000-01A

 

Remove/install

1

Remove front left fender liner.

AR88.10-S-1301P

2

Unscrew bolt (1).

3

Remove heat shield (2).

4

Separate electrical connector at crankshaft position sensor (5).

5

Remove screw (3) of crankshaft position sensor (5).

 Screw/bolt, crankshaft position sensor to crankcase

*BA07.04-N-1001-02PS

6

Remove crankshaft position sensor (5) with spacer (4) and seal opening with suitable stop plug.

 Record plug

*129589009100

7

Change spacer (4).

If crankshaft position sensor (5) is replaced.

8

Install in the reverse order.

9

Read out and delete fault memory.

If crankshaft position sensor (5) is replaced.



AD00.00-S-2000-06P

 Warning

Risk of accident from vehicle starting off by itself when engine running. Risk of injury (bruises and burns) resulting from working on the engine while it is being started or when it is running.

Secure vehicle to prevent it from starting off by itself. Wear closed and snug-fitting work clothes. Do not touch hot or rotating parts.

AS00.00-Z-0005-01A

10

Perform engine test run.

 Sensors

Number

Designation

Engine 642 in model 470, 471

BA07.04-N-1001-02PS

Screw/bolt, crankshaft position sensor to crankcase

Nm

9