1 | Exhaust pressure sensor |
2 | Electrical connector |
S07.04-4753-76
Warning | Risk of burn injuries, suffocation and poisoning when working on the exhaust system and the components connected to it. Risk of suffocation and risk of poisoning caused by inhalation of gaseous and solid components of the exhaust. Risk of poisoning caused by skin contact with solid components of the exhaust. | Wear protective clothing and safety glasses. Use the extraction system. Move people out of the hazard area. | |
Warning | Risk of injury. Skin or eye injuries may result when handling hot or glowing objects. | Wear protective gloves, protective clothing and safety glasses, if necessary. | |
Caution | Risk of injury caused by scraping or cutting body parts on sharp vehicle parts | Always wear protective gloves when working on or near sharp and non-deburred vehicle parts. | |
Topical note | Notes on avoiding damage through contamination and foreign objects | ||
Topical note | Information on preventing damage to electronic components due to electrostatic discharge | ||
| Remove/install | ||
1 | Remove upper engine cover. | Installation: Only install upper engine cover after the leak test. | |
2 | Disconnect electrical connection (2). | ||
3 | Remove exhaust pressure sensor (1). | Seal connections. | |
Installation: Coat thread of exhaust pressure sensor (1) with heat-resistant lubricating paste. | |||
Exhaust pressure sensor to exhaust gas recirculation valve | |||
Paste, hot lubrication 1 kg, DBL 6879.20 | |||
Record plug | |||
4 | Install in the reverse order. | ||
5 | Read out and delete fault memory using vehicle diagnosis system. | If exhaust pressure sensor (1) is replaced. | |
| Connect/disconnect diagnostic unit | ||
Warning | Risk of accident from vehicle starting off by itself when engine running. Risk of injury (bruises and burns) resulting from working on the engine while it is being started or when it is running. | Secure vehicle to prevent it from starting off by itself. Wear closed and snug-fitting work clothes. Do not touch hot or rotating parts. | |
6 | Perform engine test run and check exhaust pressure sensor (1) for leaks. |
129 589 00 91 00
Record plug
Henviste dokumenter
- ad0000s200006p
- ah0000p500001a Oplysninger om forebyggelse af skader på grund af snavs og fremmedlegemer
- ah5400p000101a Oplysninger med henblik på at undgå skader på elektroniske komponenter på grund af elektrostatisk afladning
- as0000z000201a Fare for personskade på hud og øjne ved håndtering af varme eller glødende genstande
- as0000z000501a Fare for ulykke ved automatisk igangsætning når motoren kører. Fare for personskade på grund af knusning og forbrænding, hvis der arbejdes mens motoren startes eller kører
- as0000z001701a Fare for personskade på grund af snitsår eller hudafskrabninger grundet skarpkantede køretøjsdele
- as4900z000101a Forbrændings-, kvælnings- og forgiftningsfare ved arbejde på udstødningssystemet og dermed forbundne komponenter. Kvælningsfare og fare for forgiftning ved indånding af gasformede og faste komponenter i forbrændingsgassen. Fare for