ar0703p1451a

Remove/install fuel distributor with injection valves (ME-SFI)

Type ar · emne 07.03 · version 0118 · 2009-11-19

Gælder for: ENGINE 112.910 in MODEL 202.026 /086 ENGINE 112.920 in MODEL 202.089 /029 ENGINS 112.921 in MODEL 210.081 /281 /063 /263 ENGINE 112.923 in MODEL 129.059 ENGINE 112.940 in MODEL 208.365 /465 ENGINE 112.941 in MODEL 210.282 /065 /082 /265 ENGINE 112.942 in MODEL 163.154 ENGINE 112.943 in MODEL 129.064 ENGINE 112.970 in MODEL 163.157 ENGINE 113.940 in MODEL 210.070 /270 ENGINE 113.961 in MODEL 129.068 ENGINE 113.980 in MODEL 210.074 /274 ENGINE 113.944 in MODEL 202.033 /093 ENGINE 113.942 in M

Ikke tilgængelig på “da”; vises på Engelsk.

Placering

Funktionsgruppe 1 Motor › 07 Blandingstilberedning › 07.03 Indsprøjtningsdyser, indsprøjtningsventiler, ledninger — Serie 129 (modeller 059, 064, 068) · Serie 163 (modeller 154, 157, 172, 174, 175) · Serie 202 (modeller 026, 029, 033, 086, 089, 093) · Serie 208 (modeller 365, 370, 374, 465, 470) · Serie 210 (modeller 063, 065, 070, 074, 081, 082, 263, 265, 270, 274, 281, 282)

EinPAS 15 Motor › 15.45 Motorstyring › 15.45.42 brændstoffordeler/rail/dyse/injektor — Serie 129 (modeller 059, 064, 068) · Serie 163 (modeller 154, 157, 172, 174, 175) · Serie 202 (modeller 026, 029, 033, 086, 089, 093) · Serie 208 (modeller 365, 370, 374, 465, 470) · Serie 210 (modeller 063, 065, 070, 074, 081, 082, 263, 265, 270, 274, 281, 282)

Gælder også for motorer/gearkasser: 112 910, 112 920, 112 921, 112 923, 112 940, 112 941, 112 942, 112 943, 112 970, 113 940, 113 942, 113 943, 113 944, 113 961, 113 965, 113 980, 113 981, 113 984

AR07.03-P-1451A

Remove/install fuel distributor with injection valves (ME-SFI)

3.11.09

ENGINE 112.910 in MODEL 202.026 /086

ENGINE 112.920 in MODEL 202.089 /029

ENGINS 112.921 in MODEL 210.081 /281 /063 /263

ENGINE 112.923 in MODEL 129.059

ENGINE 112.940 in MODEL 208.365 /465

ENGINE 112.941 in MODEL 210.282 /065 /082 /265

ENGINE 112.942 in MODEL 163.154

ENGINE 112.943 in MODEL 129.064

ENGINE 112.970 in MODEL 163.157

ENGINE 113.940 in MODEL 210.070 /270

ENGINE 113.961 in MODEL 129.068

ENGINE 113.980 in MODEL 210.074 /274

ENGINE 113.944 in MODEL 202.033 /093

ENGINE 113.942 in MODEL 163.172

ENGINE 113.943 in MODEL 208.370 /470

ENGINE 113.984 in MODEL 208.374

ENGINE 113.981 in MODEL 163.174

ENGINE 113.965 in MODEL 163.175

Remove/install fuel distributor with injection valves (ME-SFI)

P07.40-0217-06

Shown on M112

1/1 Service valve

1/4 Bolt

2/1 Resonance housing

17 Fuel distributor

17/1 Bolts

17/2 Feed line

Y62 Fuel injection valves

Remove/install

Danger!

Risk of explosion caused by fuel igniting, risk of poisoning caused by inhaling and swallowing fuel and risk of injury to eyes and skin caused by contact with fuel

No fire, sparks, open flames or smoking.
Only pour fuels into suitable and appropriately marked containers.

Wear protective clothing when handling fuel.

AS47.00-Z-0001-01A

1.1

Remove cover on front side of engine

Model 129.

2

Remove cylinder head cover trim panel or air filter

Remove cylinder head cover trim or air filter by lifting upwards from the cylinder head covers.

3.1

Take off resonance housing (2/1)

Only on model with air filter attached to vehicle.

4

Remove plastic cover

Remove bolt (1/4).

5

Release fuel pressure through service valve (1/1)

Make sure to collect fuel.

Pressure hose

*119589046300

6

Detach feed line (17/2)

Make sure to collect fuel.

M112:

*BA07.52-P-1001-01A

M113:

*BA07.52-P-1001-01A

7

Separate electrical connector at fuel injection valves (Y62)

8

Take out screws (17/1), lift fuel rail (17) together with all injectors off the intake manifold

Inspect O-rings for damage.

Oil O-rings before installing the fuel rail.

Remove/install injection valves (ME-SFI)

AR07.03-P-6520A

Checking

9

Test fuel injectors (Y62)

Refer to DMAN Engine, Volume 4, Index 31/1

10

Install in the reverse order

Fuel distributor

Number

Designation

Engine
112 except
112.945/951/
960/961

BA07.52-P-1001-01A

Fuel feed line to fuel distributor

Nm

38

Fuel distributor

Number

Designation

Engine
113.940/941/
942/943/944/
945/946/948/
960/961/962/
963/964/965/
966/967/968/
969/971/980/
981/982/984/
986/988

BA07.52-P-1001-01A

Fuel feed line to fuel distributor

Nm

38

Remove/install fuel distributor with injection valves (ME-SFI)

119 589 04 63 00

Pressure hose

Henviste dokumenter