Remove/install fuel distributor with injection valves (ME-SFI) · ar0703p1451a · Mercedes-Benz WIS

AR07.03-P-1451A

Remove/install fuel distributor with injection valves (ME-SFI)

3.11.09

ENGINE 112.910 in MODEL 202.026 /086

ENGINE 112.920 in MODEL 202.089 /029

ENGINS 112.921 in MODEL 210.081 /281 /063 /263

ENGINE 112.923 in MODEL 129.059

ENGINE 112.940 in MODEL 208.365 /465

ENGINE 112.941 in MODEL 210.282 /065 /082 /265

ENGINE 112.942 in MODEL 163.154

ENGINE 112.943 in MODEL 129.064

ENGINE 112.970 in MODEL 163.157

ENGINE 113.940 in MODEL 210.070 /270

ENGINE 113.961 in MODEL 129.068

ENGINE 113.980 in MODEL 210.074 /274

ENGINE 113.944 in MODEL 202.033 /093

ENGINE 113.942 in MODEL 163.172

ENGINE 113.943 in MODEL 208.370 /470

ENGINE 113.984 in MODEL 208.374

ENGINE 113.981 in MODEL 163.174

ENGINE 113.965 in MODEL 163.175

P07.40-0217-06

Shown on M112

1/1 Service valve

1/4 Bolt

2/1 Resonance housing

17 Fuel distributor

17/1 Bolts

17/2 Feed line

Y62 Fuel injection valves

 	Remove/install
Danger!	Risk of explosion caused by fuel igniting, risk of poisoning caused by inhaling and swallowing fuel and risk of injury to eyes and skin caused by contact with fuel	No fire, sparks, open flames or smoking. Only pour fuels into suitable and appropriately marked containers. Wear protective clothing when handling fuel.	AS47.00-Z-0001-01A
1.1	Remove cover on front side of engine	 Model 129.
2	Remove cylinder head cover trim panel or air filter	 Remove cylinder head cover trim or air filter by lifting upwards from the cylinder head covers.
3.1	Take off resonance housing (2/1)	 Only on model with air filter attached to vehicle.
4	Remove plastic cover	 Remove bolt (1/4).
5	Release fuel pressure through service valve (1/1)	 Make sure to collect fuel.
		 Pressure hose	*119589046300
6	Detach feed line (17/2)	 Make sure to collect fuel.
		 M112:
			*BA07.52-P-1001-01A
		 M113:
			*BA07.52-P-1001-01A
7	Separate electrical connector at fuel injection valves (Y62)
8	Take out screws (17/1), lift fuel rail (17) together with all injectors off the intake manifold	 Inspect O-rings for damage.  Oil O-rings before installing the fuel rail.
		Remove/install injection valves (ME-SFI)	AR07.03-P-6520A
	Checking
9	Test fuel injectors (Y62)	 Refer to DMAN Engine, Volume 4, Index 31/1
10	Install in the reverse order

 Fuel distributor

Number	Designation		Engine 112 except 112.945/951/ 960/961


BA07.52-P-1001-01A	Fuel feed line to fuel distributor	Nm	38

 Fuel distributor

Number	Designation		Engine 113.940/941/ 942/943/944/ 945/946/948/ 960/961/962/ 963/964/965/ 966/967/968/ 969/971/980/ 981/982/984/ 986/988


BA07.52-P-1001-01A	Fuel feed line to fuel distributor	Nm	38

119 589 04 63 00

Pressure hose

ar0703p6520a Remove/install injection valves (ME-SFI)
as4700z000101a Risk of explosion caused by fuel igniting, risk of poisoning caused by inhaling and swallowing fuel as well as risk of injury to eyes and skin caused by contactwith fuel.