Remove/install race on flywheel · ar0330w8350c · Mercedes-Benz WIS

AR03.30-W-8350C

Remove/install race on flywheel

23.9.10

ENGINES 457.9 in MODEL 374, 375, 940, 942, 943, 944, 958 except CODE (N52) Rear engine power take-off, output torque 600 Nm

ENGINES 457.9 in MODEL 374, 375, 940, 942, 943, 944, 958 except CODE (N53) Rear engine output for hydraulic pump

W03.30-1070-09

1 Flywheel

2 Race

5  Drift

3  Thrust piece

4  Puller

Modification notes

28.5.10	Picture changed
	Race for radial shaft sealing ring on flywheel altered - added.	Operation step 4	BT03.30-W-0006-01A

	Removing
1	Remove flywheel (1)		AR03.30-W-8002C
2	Use puller (4) to pull race (2) off flywheel (1)	 Insert to detach thrust piece (3) in flywheel (1).
		 Puller	*000589453300
		 Thrust piece	*312589001500
3	Remove radial shaft sealing ring on timing case		AR03.20-W-3063C
	Install
 Danger!	Risk of injury to skin and eyes caused by handling hot or glowing objects.	Wear safety gloves, protective clothing and safety glasses, if necessary.	AS00.00-Z-0002-01A
4	Heat up new race (2)	 Heat race (2) to a temperature of a maximum of 60°C. The race (2) must not have any temper color; replace race (2) if required.
	Race for radial shaft sealing ring on flywheel altered		BT03.30-W-0006-01A
5	Place race (2) on flywheel (1)	 The rounded edge of the race (2) must point towards the drift (5).
6	Reposition race (2) on flywheel (1) using drift (5)	 The  drift (5) determines the installation depth of the race (2) on the flywheel (1).
		 Drift	*403589031500
7	Install new radial shaft sealing ring in the timing case	 Install radial shaft sealing ring with a larger inside diameter.	AR03.20-W-3063C
8	Install flywheel (1)	 The race (2) on flywheel (1) must be cooled off.	AR03.30-W-8002C

312 589 00 15 00

Drift

Thrust piece

Puller

000 589 45 33 00

403 589 03 15 00

ar0320w3063c
ar0330w8002c
as0000z000201a Fare for personskade på hud og øjne ved håndtering af varme eller glødende genstande
bt0330w000601a