Remove/install cap with front radial shaft sealing ring

AR01.40-P-8922MFF

Remove/install cap with front radial shaft sealing ring

14.02.2020

Engine

654 in model 118, 177, 247

Modification notes

25.10.2016

Kurbelgehäusedeckel an Kurbelgehäuse

Motor 654

BA01.40-P-1002-01X

1

End cover with radial shaft sealing ring

2

Screw

3

Vacuum valve

 Warning

Risk of injury. Skin or eye injuries may result when handling hot or glowing objects.

Wear protective gloves, protective clothing and safety glasses, if necessary.

AS00.00-Z-0002-01A

 Caution

Risk of injury to skin and eyes due to handling of engine oil. Risk of poisoning caused by swallowing engine oil

Wear protective gloves, protective clothing and safety glasses.
Do not fill engine oil into beverage containers.

AS18.00-Z-0001-01A

Topical note

Notes on avoiding damage through contamination and foreign objects

AH00.00-P-5000-01A

Topical note

Notes on threaded connections fastened using a tightening angle-based tightening process

AH00.00-P-0020-01A

 

Remove/install

1

Remove front right fender liner.

AR88.10-P-1301MFA

 Installation: Install front right fender liner only after the leak test.

2

Remove belt pulley/vibration damper.

AR03.30-P-1600MFF

3

Remove screw (2) and place vacuum valve (3) with connected vacuum line to one side.

4

Remove end cover with radial shaft sealing ring (1).

AR01.40-P-8922-03OLC

 Bottom half of crankcase to crankcase

*BA01.40-P-1002-01X

Antifriction paste, rubber parts 2.5 kg, DBL 6867.00

*BR00.45-Z-1002-06A

 Insertion device

*654589004300

5

Install in the reverse order.



Check

6

Check engine oil level and correct.

Engine 654 in model 118, 177, 247



Engine 654 in model 177, 247

AP18.00-P-1812MFA

 Warning

Risk of accident from vehicle starting off by itself when engine running. Risk of injury (bruises and burns) resulting from working on the engine while it is being started or when it is running.

Secure vehicle to prevent it from starting off by itself. Wear closed and snug-fitting work clothes. Do not touch hot or rotating parts.

AS00.00-Z-0005-01A

7

Carry out engine test run and check engine for proper leaktightness and leaktightness.

8

Install front right fender liner.

AR88.10-P-1301MFA

 Crankcase, timing case cover, end cover

Number

Designation

Engine 654

BA01.40-P-1002-01X

Bottom half of crankcase to crankcase

Stage 1

Nm

8

Stage 2

°

30

Repair materials

Number

Designation

Order number

BR00.45-Z-1002-06A

Antifriction paste, rubber parts 2.5 kg, DBL 6867.00

A 000 989 01 60