ap4720b0780evi

Replace fuel filter

Type ap · emne 47.20 · version 0100 · 2018-04-18

Gælder for: Engine 936.915/923 in model 382.155/189 with code MS6 (Euro VI)

Ikke tilgængelig på “da”; vises på Engelsk.

Placering

Funktionsgruppe 1 Motor › 47 Brændstofsystem, energiforsyning drivline › 47.20 Brændstofpumpe, filter — Serie 382 (modeller 155, 189) · Serie 936 (modeller 915, 923)

EinPAS 16 Brændstof-/energiforsyning motor › 16.10 Brændstofforsyning › 16.10.41 filter/vandudskiller — Serie 382 (modeller 155, 189) · Serie 936 (modeller 915, 923)

AP47.20-B-0780EVI

Replace fuel filter

12.04.2018

Engine

936.915/923 in model 382.155/189

with code MS6 (Euro VI)

Replace fuel filter

1

Fuel filter threaded cover

2

Sealing ring

3

Fuel filter

B18.20-0033-04

Remove

Warning

Risk of accident from vehicle starting off by itself when engine running. Risk of injury (bruises and burns) resulting from working on the engine while it is being started or when it is running.

Secure vehicle to prevent it from starting off by itself. Wear closed and snug-fitting work clothes. Do not touch hot or rotating parts.

AS00.00-Z-0005-01A

Danger

Risk of explosion caused by fuel igniting, risk of poisoning caused by inhaling and swallowing fuel as well as risk of injury to eyes and skin caused by contactwith fuel.

No fires, sparks, open flames or smoking. Pour fuels into suitable and appropriately marked containers only.
Wear protective clothing when handling fuel.

AS47.00-Z-0001-01A

Topical note

Notes on avoiding damage through contamination and foreign objects

AH00.00-N-5000-01H

1

Open the fuel tank closing cap and close it again

Open the closing cap to relieve the overpressure in the fuel tank.

2

Open the engine compartment

Access to perform the maintenance and repairs varies according to the bodywork type/manufacturer of the bodywork.

Refer to the body makers instructions.

3

Clean the surroundings of the fuel filter module

4

Replace fuel prefilter

AP47.20-B-0781EVI

5

Remove the fuel filter threaded cover (1) in the fuel filter module

Please pay attention so that foreign bodies do not enter the fuel filter module.

Under no circumstances clean the fuel filter housing. Otherwise, function failures can occur.

Fuel filter cover on fuel filter module

*BA47.20-B-1002-02EVI

6

Drain water from fuel system

Install

7

Replace the sealing ring (2)

Grease lightly the sealing ring.

8

Insert a new fuel filter (3) in the fuel filter module

9

Tighten the threaded cover (1) on fuel filter module

Fuel filter cover on fuel filter module

*BA47.20-B-1002-02EVI

10

Bleed the fuel system with the hand pump

Check

11

Check the leak-tightness of the fuel filter module with the engine running

Only visual inspection, after stopping the engine.

12

Correct the failure "Fuel filter change in the Display"

Delete the failure "Fuel filter change Only in previous indications on the Display. "overdue" of "Added fuel filter" using the diagnosis system.

Fuel filter

Number

Designation

ENGINE 936.9

BA47.20-B-1002-02EVI

Fuel filter cover on fuel filter module

Nm

25

Henviste dokumenter