ap4720b0781evi

Replace fuel prefilter

Type ap · emne 47.20 · version 0100 · 2018-04-18

Gælder for: Engine 936.9 in model 382.155/189 with code MS6 (Euro VI)

Ikke tilgængelig på “da”; vises på Engelsk.

Placering

Funktionsgruppe 1 Motor › 47 Brændstofsystem, energiforsyning drivline › 47.20 Brændstofpumpe, filter — Serie 382 (modeller 155, 189) · Serie 936 (modeller 9**)

EinPAS 16 Brændstof-/energiforsyning motor › 16.10 Brændstofforsyning › 16.10.41 filter/vandudskiller — Serie 382 (modeller 155, 189) · Serie 936 (modeller 9**)

AP47.20-B-0781EVI

Replace fuel prefilter

12.04.2018

Engine

936.9 in model 382.155/189

with code MS6 (Euro VI)

Replace fuel prefilter

1

Fuel prefilter

2

Fuel filter

B47.20-0013-01

Remove

Danger

Risk of explosion caused by fuel igniting, risk of poisoning caused by inhaling and swallowing fuel as well as risk of injury to eyes and skin caused by contactwith fuel.

No fires, sparks, open flames or smoking. Pour fuels into suitable and appropriately marked containers only.
Wear protective clothing when handling fuel.

AS47.00-Z-0001-01A

Warning

Risk of accident from vehicle starting off by itself when engine running. Risk of injury (bruises and burns) resulting from working on the engine while it is being started or when it is running.

Secure vehicle to prevent it from starting off by itself. Wear closed and snug-fitting work clothes. Do not touch hot or rotating parts.

AS00.00-Z-0005-01A

Topical note

Notes on avoiding damage through contamination and foreign objects

AH00.00-N-5000-01H

1

Open the fuel tank closing cap and close it again

Open the sealing cover to relieve the overpressure in the fuel tank.

2

Open the engine compartment

Access to perform the maintenance and repairs varies according to the bodywork type/manufacturer of the bodywork.

Refer to the body makers instructions.

3

Clean the surroundings of the fuel filter module

4

Replace the fuel filter (2)

AP47.20-B-0780EVI

5

Remove the fuel prefilter threaded cover (1)

Only remove the threaded cover with the filtering element after the fuel has been drained from the fuel filter housing.

6

Detach the fuel prefilter strainer pressing it to the side

Please pay attention so that foreign bodies do not enter the filter housing.

Under no circumstances clean the fuel filter module. Otherwise failures can occur in the module functions.

Install

7

Replace the sealing ring in the fuel prefilter threaded cover (1)

Grease lightly the sealing ring.

8

Place a new strainer in the fuel filter module

9

Screw and tighten the fuel prefilter threaded cover (1)

Fuel prefilter cover on fuel filter module

*BA47.20-B-1001-02EVI

Check

10

Check the leak-tightness of the fuel filter module with the engine running

Only inspection. After stopping the engine.

11

Check then failure of the fuel filter change on diagnosis equipment

Using the diagnosis equipment, delete the failure "overdue fuel filter change" or "clogged fuel filter" on engine management control unit (MCM)

Only for previous indications on Display.

Fuel filter

Number

Designation

ENGINE 936.9

BA47.20-B-1001-02EVI

Fuel prefilter cover on fuel filter module

Nm

25

Henviste dokumenter