ap3220b3255a
Leaf springs/air bellows - visual inspection for damage
Type ap · emne 32.20 · version 0202 · 2017-06-15
Gælder for: Model all (BUS, TRUCK)
Ikke tilgængelig på “da”; vises på Engelsk.
Placering
Funktionsgruppe 2 Chassis › 32 Affjedring › 32.20 Stålaffjedring, torsionsstang, niveaumat — Serie 900 (modeller 9**) · Serie 902 (modeller 9**) · Serie 904 (modeller 918, 919, 924, 925, 938, 943, 957) · Serie 906 (modeller 917, 918, 924, 953)
EinPAS 10 Service › 10.30 Serviceeftersyn › 10.30.30 Serviceeftersyn — Serie 900 (modeller 9**) · Serie 902 (modeller 9**) · Serie 904 (modeller 918, 919, 924, 925, 938, 943, 957) · Serie 906 (modeller 917, 918, 924, 953)
EinPAS 20 Undervogn › 20.16 affjedring › 20.16.30 fjeder/fjederbælg/støddæmper/fjederben — Serie 900 (modeller 9**) · Serie 902 (modeller 9**) · Serie 904 (modeller 918, 919, 924, 925, 938, 943, 957) · Serie 906 (modeller 917, 918, 924, 953)
Gælder også for motorer/gearkasser: 139 ***, 254 ***, 256 ***, 272 ***, 276 ***, 282 ***, 457 9**, 541 9**, 542 9**, 608 ***, 700 4**, 700 420, 700 421, 700 422, 700 423, 715 3**, 715 5**, 722 6**, 722 9**, 724 ***, 724 0**, 724 033, 724 044, 724 045, 724 1**, 724 103, 724 114, 724 115, 724 120, 725 ***, 725 0**, 725 035, 725 037, 725 038, 725 085, 725 1**, 739 390, 739 391, 739 395, 739 396, 739 397, 739 398, 739 399, 740 698, 743 3**, 743 4**, 743 498, 746 971, 924 9**, 924 910, 925 9**, 926 9**
AP32.20-B-3255A
| Leaf springs/air bellows - visual inspection for damage
| 07.06.2017
|
Vehicles with metal suspension
|
|
|
| Leaf springs
|
|
|
|
|
| Vehicles fitted with air suspension
|
|
|
|
| Air spring bellow
|
|
|
|
| Support base
|
| Check
|
|
|
1
| Check the blades of the leaf springs for the misalignment of the mounting position, cracks and damage
| In vehicles with mechanical suspension:
|
|
|
|
|
|
|
|
|
| Follow work steps 1 and 2.
|
|
|
|
| Align the misaligned blades and/or replace broken blades with separated invoicing.
|
|
2
| Check spring clips and brackets for fixture and conditions
| If necessary:
|
|
|
|
|
|
|
|
|
| Replace at extra charge.
|
|
| Check
|
|
|
3
| Check the bellows pneumatic suspension for damage and wear
| In vehicles fitted with pneumatic suspension:
|
|
|
|
|
|
|
|
|
| Follow work steps 3, 4, 5, 6, 7 and 8.
|
|
|
|
| Replace the damaged pneumatic suspension bellows (cracks, cuts, friction points) with separate invoicing.
|
|
4
| Detach and engage the suspension control valve lever upwards so that the bellows from suspension gets inflated
|
|
|
5
| Examine any impurities located on the side of the pneumatic bellows base
|
|
|
6
| Trigger the lever of the suspension height adjustment valve down to expel the air and check the seat of the pneumatic bellows on the support base
| The air bellows should not be twisted.
Check the air bellow bending area.
|
|
7
| Fit the suspension height adjustment valve lever
|
|
|
8
| Do the same for all bellows air suspension
|
|
|
