ap1440d1452hl

Check diesel particulate filter

Type ap · emne 14.40 · version 0202 · 2016-04-05

Gælder for: Engine 642, 651.9 in model 906 with code ZU8 (National version for USA)

Ikke tilgængelig på “da”; vises på Engelsk.

Placering

Funktionsgruppe 1 Motor › 14 Udstødningsmanifold, motorbremse, udstødningsrenseanlæg › 14.40 Efterbehandling af udstødningsgas, AdBlue — Serie 651 (modeller 9**) · Serie 906

EinPAS 15 Motor › 15.40 Udstødningssystem/udstødningsefterbehandling › 15.40.50 Udstødningsefterbehandlingsenhed — Serie 651 (modeller 9**) · Serie 906

Gælder også for motorer/gearkasser: 642 ***

AP14.40-D-1452HL

Check diesel particulate filter

31.03.2016

Engine

642, 651.9 in model 906

with code ZU8 (National version for USA)

Check

1

Check fill level using diagnostic system

If the fill level is below the limit value, the fill level of the diesel particulate filter must be checked again at each oil service plus or maintenance service.
After installing the new diesel particulate filter the test cycle starts again after 100.000 miles.

Fill level of diesel particulate filter is above limit value.

Install new diesel particulate filter.


Engine 642.993 in model 906
with code ZU8 (National version for USA)
except code XM0 (Facelift)

AR14.40-D-1000SD


Engine 642.896 in model 906
with code ZU8 (National version for USA)
except code XM0 (Facelift)

AR49.10-D-5501SG


Engine 642.898 in model 906
with code XM0 (Facelift)
with code ZU8 (National version for USA)

AR49.10-D-5501S


Engine 651.9 in model 906
with code ZU8 (National version for USA)

AR49.10-D-5501M

Henviste dokumenter