CAN data bus, testing electrical system of ESP

Type ad · emne 42.45 · version 0104 · 2003-06-10

Gælder for: MODEL 168 with CODE (472a) Electronic stability program (ESP) MODEL 202 with ENGINE 112, 113, 604 with CODE (472a) Electronic stability program (ESP) MODEL 208 with ENGINE 112, 113 with CODE (472a) Electronic stability program (ESP) MODEL 210 with ENGINE 111, 112, 113, 604, 605, 606, 611, 612, 613 with CODE (472a) Electronic stability program (ESP)

Ikke tilgængelig på “da”; vises på Engelsk.

Placering

Funktionsgruppe 2 Chassis › 42 Bremsehydraulik og -mekanik › 42.45 Elektronisk stabilitetsprogram (ESP), stabilitetsregulering (SR) — Serie 168 · Serie 202 · Serie 208 · Serie 210 · Serie 611 · Serie 613

EinPAS 26 Aktive sikkerhedssystemer › 26.20 Bremse-/traktionsregulering › 26.20.1 Grundinformation — Serie 168 · Serie 202 · Serie 208 · Serie 210 · Serie 611 · Serie 613

Gælder også for motorer/gearkasser: 111 ***, 112 ***, 113 ***, 604 ***, 605 ***, 606 ***, 612 ***

AD42.45-P-6000-35A

CAN data bus, testing electrical system of ESP

 	Scope of test	Measuring instrument/ Test connection			Operation/Requirement	Specified value	 Possible cause/Remedy

1.0  	CAN data bus Resistance	L  (3.L)		 H (3.H)	Disconnect 2-pin coupling (3) from test wiring harness and test at the coupling	55–65 Ω	 Cables  1.1  1.2
1.1	Engine 112, 113 CAN module in engine control module (ME-SFI) (N3/10) Resistance Engine 166 CAN module in MSM control module (N3/5) Resistance Engine 668 CAN module in CDI control module (N3/9) Resistance	D.11  1.75  2.12 	N3/10  N3/5  N3/9 	 D.12  1.76  2.11	Remove N3/10, N3/5 or N3/9 and test directly at control module	115–125 Ω	 N3/5, N3/10 or N3/9  D.M. Engine or diesel engine
1.2	CAN module in electronic ignition switch control module (N73) Resistance	L 	N73 	 H	Disconnect 2-pin coupling at N73 and test directly at control module	115–125 Ω	 N73