Operation no. of the operation texts or standard texts and flat rates | |||||
Category | Op. no. | Operation text | Time | Acc. no. | Code |
N | 022070 | Check screw plug | 0,1 h | 26 935 60 | RIEGELBOLZ |
N | 022071 | Modify catch bolt (after check) | 0,2 h | 26 935 60 | RIEGELBOLZ |
N | 022076 | Extra work for: Modify catch bolt on veh. with step plate above transmission | 0,2 h | 26 935 60 | RIEGELBOLZ |
N | 029987 | Extra work for modifying catch bolt, in vehicle with bolted support arms and screw plug below support arm | 0,4 h | 26 935 60 | RIEGELBOLZ |
N | 022072 | Extra work for: Modify catch bolt on veh. with code A1H | 0,3 h | 26 935 60 | RIEGELBOLZ |
W26.31-1052-09
1 | Screw plug | 2 | Spring | 3 | Catch bolt |
W26.31-1053-08
1 | Screw plug | 3 | Catch bolt | 5 | Spring cup | ||
2 | Spring | 4 | Screw |
| Check | ||
1 | Perform visual check of screw plug (1) | If there is a green mark on the screw plug (1). | |
| |||
Perform no further operations and end measure. | |||
If there is no green mark on the screw plug (1). | |||
| |||
Proceed with step 2. | |||
| Remove | ||
2 | Support transmission using telescopic lifter | Only in vehicles with bolted support arms and in which the screw plug (1) is located below the support arm. | |
3 | Remove step plate over transmission | Only on semitrailer tractors. | |
4 | Remove bracket of hydraulic lines | Only on model 963, 964 with code A1H (Hydraulic Auxiliary Drive (HAD)). | |
5 | Remove left support arm from transmission | Only in vehicles with bolted support arms and in which the screw plug (1) is located below the support arm. | |
6 | Remove screw plug (1) | The screw plug (1) is spring-loaded. | |
7 | Remove spring (2) with catch bolt (3) | ||
8 | Detach screw (4) and spring retainer (5) from catch bolt (3) | The removed screw (4) and the spring retainer (5) are not reused. | |
| Install | ||
9 | Install catch bolt (3) with spring (2) | ||
10 | Coat screw plug (1) with thread locking compound and install | | |
Quick-acting adhesive, Loctite 270 | |||
Model 956, 963, 964Range group shift rod lock to transmission housing | |||
Model 930, 932, 933, 934, 940, 942, 944 with transmission 715.5 (except 715.515/525)Range group shift rod lock to transmission housing | |||
Model 930, 932, 933, 934, 940, 944 with transmission 715.3/515/525Range group shift rod lock to transmission housing | |||
11 | Install left support arm on transmission | Only in vehicles with bolted support arms and in which the screw plug (1) is located below the support arm. | |
Model 956, 963, 964Bolt, supporting arm to transmission | |||
Model 956, 963, 964Bolt, transmission to transmission mount | |||
Model 930, 932, 933, 934, 940, 942, 944 with transmission 715.5 (except 715.515/525)Supporting arm to transmission | |||
Model 930, 932, 933, 934, 940, 942, 944 with transmission 715.5 (except 715.515/525)Supporting arm to frame | |||
Model 930, 932, 933, 934, 940, 944 with transmission 715.3/515/525Supporting arm to transmission | |||
Model 930, 932, 933, 934, 940, 944 with transmission 715.3/515/525Supporting arm to frame | |||
12 | Install bracket of hydraulic lines | Only on model 963, 964 with code A1H (Hydraulic Auxiliary Drive (HAD)). | |
13 | Install step plate over transmission | Only on semitrailer tractors. | |
14 | Detach telescopic lifter from transmission | Only in vehicles with bolted support arms and in which the screw plug (1) is located below the support arm. |