sm2020w0029a

Replace coolant hose and rework bracket

Typ sm · téma 20.20 · verze 0100 · 2015-05-13

Platí pro: Engine 471.9 in model 964 with code F2N (Cab, 600 mm attachment height) with code M8A (Air intake, from front)

Není k dispozici v jazyce „cs“; zobrazeno v jazyce Angličtina.

Zařazení

Funkční skupina 1 Motor › 20 Chlazení motoru › 20.20 Chladič, hadice chlazení — Řada 471 (modely 9**) · Řada 964

EinPAS 15 Motor › 15.25 Chladicí systém motoru › 15.25.13 Potrubí/hadice/ventil — Řada 471 (modely 9**) · Řada 964

EinPAS 45 Data/informace › 45.20 Informace/opatření › 45.20.40 Servisní opatření — Řada 471 (modely 9**) · Řada 964

SM20.20-W-0029A

Replace coolant hose and rework bracket

12.5.15

Engine

471.9 in model 964

with code F2N (Cab, 600 mm attachment height)

with code M8A (Air intake, from front)

Operation no. of the operation texts or standard texts and flat rates

Category

Op. no.

Operation text

Time

Acc. no.

Code

N

028980

Replace coolant hose

1,2 h

20 910 76

KUEHLWSCHL

Replace coolant hose and rework bracket

W20.20-1193-09

1

Coolant hose

Pfeil

Gap

2

Bracket

A

Separation line

Danger !

Risk of injury to skin and eyes suffering scalding from contact with hot coolantspray. Risk of poisoning from swallowing coolant.

Do not open cooling system unless coolant temperature is below 90 °C. Open cap slowly and release the pressure. Do not pour coolant into beverage containers.
Wear protective gloves, protective clothing and safety glasses.

AS20.00-Z-0001-01A

Danger !

Risk of injury caused by body parts being pinched or crushed as cab is tilted

Ensure that no one is within the tilting range of the cab as it is being tilted. Always tilt the cab all the way to the end position and secure with the safety strut.

AS60.80-Z-0001-01A

Notes on coolant

AH20.00-N-2080-01A

Notes on tilting the cab

AH60.80-N-0003-01A

Remove

1

Open maintenance flap

2

Drain coolant at engine radiator

AR20.00-W-1142H

3

Tilt cab

4

Draw separation line (A) on bracket (2)

The separation line (A) must be drawn such that a gap (arrow) of approx. 1 cm is present between the coolant hose (1) and bracket (2) after separation.

5

Remove coolant hose (1)

With regard to return shipment or scrapping of removed parts, please observe the information in your warranty system.

6

Cut off bracket (2) at separation line (A)

Install

7

Install new coolant hose (1)

8

Lower cab

9

Pour in coolant

AR20.00-W-1142H

10

Close maintenance flap

Parts ordering note

Part no.

Designation

Quantity

A 960 501 15 91

Coolant hose

1

Odkazované dokumenty