07.1-8050 Servicing injection timing device
Preceding work: Injection timing device removed (07.1-8011). |
1 | Cam check |
2 | Sprocket check |
3 | Bush check |
4 | Needle bearing check |
5 | Washers |
6 | Cheese-head screws 10 Nm |
7 | Governor weights |
8 | Hexagon socket bolts 23 Nm |
9 | Segment flange check |
10 | Compression springs |
11 | Drive hub |
Servicing
-------------------------------
1 Unscrew cheese-head screws (6), take off washers (5), needle bearing (4) and cam (1).
2 Take out governor weights (7).
Installation notes
Tightening torque 10 Nm.
3 Take compression springs (10) and sprocket (2) off the segment flange (9).
4 Unscrew hexagon socket bolts (8) and take off drive hub (11).
Installation note
Tightening torque 23 Nm.
5 Knock out bush (3) with a suitable drift.
6 Assemble in the reverse order.