ar9160p061102a

Deployment of removed airbag units

Typ ar · téma 91.60 · verze 0119 · 2003-03-12

Platí pro: MODEL 163, 168, 170, 202, 203, 208, 209, 210, 215, 220, 230, 240, 414, 461, 463 Nicht für gültig'

Není k dispozici v jazyce „cs“; zobrazeno v jazyce Angličtina.

Zařazení

Funkční skupina 3 Nástavba › 91 Sedadla, lůžka, zádržný systém › 91.60 Airbag, ochrana chodců — Řada 163 · Řada 168 · Řada 170 · Řada 202 · Řada 203 · Řada 208 · Řada 209 · Řada 210 · Řada 215 · Řada 220 · Řada 230 · Řada 240 · Řada 414 · Řada 461 · Řada 463

EinPAS 27 Systémy pasivní bezpečnosti/zádržné systémy › 27.16 Airbag › 27.16.20 Airbag — Řada 163 · Řada 168 · Řada 170 · Řada 202 · Řada 203 · Řada 208 · Řada 209 · Řada 210 · Řada 215 · Řada 220 · Řada 230 · Řada 240 · Řada 414 · Řada 461 · Řada 463

AR91.60-P-0611-02A

Deployment of removed airbag units

Danger!

Risk of injury. Injuries may result when performing testing or repair work on airbag or emergency tensioning retractor units.

Store airbag unit with expulsion area on top, do not subject to temperatures above 100 °C. When working on these units, disconnect the power supply.

AS91.00-Z-0001-01A

Danger!

Risk of injury. Injuries may result when performing testing or repair work on airbag or emergency tensioning retractor units.

Models 124, 129 up to 30.6.93, 140, 202 up to 30.6.93

Store airbag unit with expulsion area on top, do not subject to temperatures above 100 °C. When working on these units, disconnect power supply and unplug the SRS test connector (X11/13).

AS91.00-Z-0001-01B

Notes on controlled deployment of airbag, side airbag and emergency tensioning retractor units

Models 163, 168, 170, 202, 203, 208, 209, 210, 215, 220, 230, 240, 414, 461, 463

AH91.60-P-0611-02P

Notes on disposal of airbags and emergency tensioning retractors

All models

OS91.00-P-0001-01A

Deployment of removed airbag units

P91.60-0219-01

2 Pressure switch, battery control

3 Pressure switch, deployment

4 Rotary switch

5 Deployment indicator light

7 Plug connector, adapter cable

8 2-pin plug connector

Using the deployment device

1 Plug the 2-pin plug connector (8) into the unit to be scrapped.

2 Dial the rotary switch (4) to position "1".

3 Press the battery control pressure switch (2) and deployment pressure switch (3) simultaneously.

4 For airbag units with 2 squibs, both must be deployed. To do this, repeat steps 1 through 3 after plugging the ignition cable into the second squib.

Keep a distance of 10 meters for safety.

After a successful deployment, the deployment indicator light (5) flashes.

Odkazované dokumenty