ar8370d5758a

Removing and installing glow plug

Typ ar · téma 83.70 · verze 0104 · 1998-07-31

Platí pro: MODEL 902.32# /42#, 903.32# /42#, 904.32# /42# ## up to 753730 up to 31.10.97 with CODE (H11) Hot air auxiliary heater Heater designation D1L-C MODEL 903.02# ## up to 753730 up to 31.10.97 with CODE (H11) Hot air auxiliary heater Heater designation B1L-C

Není k dispozici v jazyce „cs“; zobrazeno v jazyce Angličtina.

Zařazení

Funkční skupina 3 Nástavba › 83 Klimatizace › 83.70 Nezávislé topení, přídavné topení, přihřívač — Řada 902 (modely 32*, 42*) · Řada 903 (modely 02*, 32*, 42*) · Řada 904 (modely 32*, 42*)

EinPAS 39 Topení/větrání/chlazení › 39.25 Nezávislé topení/přídavné topení › 39.25.30 Topné zařízení — Řada 902 (modely 32*, 42*) · Řada 903 (modely 02*, 32*, 42*) · Řada 904 (modely 32*, 42*)

AR83.70-D-5758A

Removing and installing glow plug

4.11.96

MODEL 902.32# /42#, 903.32# /42#, 904.32# /42# ## up to 753730 up to 31.10.97 with CODE (H11) Hot air auxiliary heater
Heater designation D1L-C

MODEL 903.02# ## up to 753730 up to 31.10.97 with CODE (H11) Hot air auxiliary heater
Heater designation B1L-C

Removing and installing glow plug

D83.70-0011-06

1 Allen bolt
2 Cover
3 Gasket
4 Hex. nut
5 Cable for glow plug
6 Glow plug
7 Sealing ring
8 Glow plug screen

Removal, installation

Danger!

Fuel vapors present an explosion hazard. Combustion gases are toxic when inhaled. Heater can cause severe burns during and after operation

Do not start up or operate stationary heaters or engines with heater boosters in closed rooms or in the vicinity of service stations. Allow heater to cool off after operation and wear protective gloves.

AS83.70-Z-0002-01A

Danger!

Fuel vapors present an explosion hazard. Fuel vapors are toxic when inhaled or absorbed. Contact with fuel can cause eye and skin injury.

Fire, open lights and smoking prohibited.
Fill and store fuel only in containers intended for this purpose and marked accordingly.

Wear protective clothing when handling fuel.

AS47.00-Z-0001-01A

1

Remove heater

AR83.70-D-5302A

2

Remove cover (2) together with gasket (3)

Installation: Check gasket for damage, replace, if necessary.

3

Remove cable (5) from glow plug (6)

4

Remove glow plug (6)

5

Remove sealing ring (7)

Installation: Use new sealing ring.

6

Remove glow plug screen (8)

Installation: Version D1L-C (diesel)
Observe installation position of lug (arrow A). The bore for the glow plug vent
(arrow B) must be free.

Installation: Version B1L-C (gasoline)
Observe installation of separating joint on screen (arrow C). The bore for the glow plug vent (arrow D) must be free.

7

Install in opposite order

Odkazované dokumenty