ar8370d5686b

Removing and installing overheat switch

Typ ar · téma 83.70 · verze 0105 · 1998-07-31

Platí pro: MODEL 901.06#, 902.06# /07#, 903.06# /07#, 904.06# ## up to 753730 up to 31.10.97 with CODE (H11) Hot air auxiliary heater Heater designation B3L-C MODEL 901.36# /37# /46#, 902.36# /37# /46# /47#, 903.36# /37# /46# /47#, 904.36# /46# ## up to 753730 up to 31.10.97 with CODE (H11) Hot air auxiliary heater Heater designation D3L-C

Není k dispozici v jazyce „cs“; zobrazeno v jazyce Angličtina.

Zařazení

Funkční skupina 3 Nástavba › 83 Klimatizace › 83.70 Nezávislé topení, přídavné topení, přihřívač — Řada 901 (modely 06*, 36*, 37*, 46*) · Řada 902 (modely 06*, 07*, 36*, 37*, 46*, 47*) · Řada 903 (modely 06*, 07*, 36*, 37*, 46*, 47*) · Řada 904 (modely 06*, 36*, 46*)

EinPAS 39 Topení/větrání/chlazení › 39.25 Nezávislé topení/přídavné topení › 39.25.12 Snímač/spínač/kabelový svazek — Řada 901 (modely 06*, 36*, 37*, 46*) · Řada 902 (modely 06*, 07*, 36*, 37*, 46*, 47*) · Řada 903 (modely 06*, 07*, 36*, 37*, 46*, 47*) · Řada 904 (modely 06*, 36*, 46*)

AR83.70-D-5686B

Removing and installing overheat switch

4.11.96

MODEL 901.06#, 902.06# /07#, 903.06# /07#, 904.06# ## up to 753730 up to 31.10.97 with CODE (H11) Hot air auxiliary heater
Heater designation B3L-C

MODEL 901.36# /37# /46#, 902.36# /37# /46# /47#, 903.36# /37# /46# /47#, 904.36# /46# ## up to 753730 up to 31.10.97 with CODE (H11) Hot air auxiliary heater
Heater designation D3L-C

Removing and installing overheat switch

D83.70-0033-09

1 Allen bolt
2 Cover
3 Gasket
4 Upper jacket half
5 Spreading rivet

11 Flame sensor
12 Exit scoop
13 Insulating shells
14 Bottom jacket half
15 Flange gasket

6 Wiring harness for overheat switch
7 Taptite screws
8 Overheat switch
9 Heat exchanger
10 Retaining spring

Removal, installation

Danger!

Fuel vapors present an explosion hazard. Combustion gases are toxic when inhaled. Heater can cause severe burns during and after operation

Do not start up or operate stationary heaters or engines with heater boosters in closed rooms or in the vicinity of service stations. Allow heater to cool off after operation and wear protective gloves.

AS83.70-Z-0002-01A

Danger!

Fuel vapors present an explosion hazard. Fuel vapors are toxic when inhaled or absorbed. Contact with fuel can cause eye and skin injury.

Fire, open lights and smoking prohibited.
Fill and store fuel only in containers intended for this purpose and marked accordingly.

Wear protective clothing when handling fuel.

AS47.00-Z-0001-01A

1

Remove heater

Models 901.06, 902.06/07, 903.06/07, 904.06

AR83.70-D-5302B

Models 901.36/37/46, 902.36/37/46/47, 903.36/37/46/47, 904.36/46 left-hand steering

AR83.70-D-5302E

Models 901.36/37/46, 902.36/37/46/47, 903.36/37/46/47, 904.36/46 right-hand steering

AR83.70-D-5302D

2

Remove heater from housing

Installation: Check flange gasket (15) for damage, replace if necessary.

AR83.70-D-5399B

3

Remove cover (2) together with gasket (3)

Installation: Check gasket for damage, replace, if necessary.

4

Remove covering parts (4, 12, 13, 14)

AR83.70-D-5398-05B

5

Disconnect electrical connectors on overheat switch (8)

Installation: Ensure that cable is routed correctly.

6

Unscrew taptite screws (7)

Installation: Use new taptite screws.

7

Remove overheat switch (8)

8

Install in opposite order

Odkazované dokumenty