ar8350d6000na

Remove/install evaporator unit for passenger compartment air conditioning

Typ ar · téma 83.50 · verze 0105 · 2009-12-14

Platí pro: MODEL 901.67, 902.67, 903.67 with CODE (HH7) Additional air conditioning in rear MODEL WD2, WD3, WD6, WD7 with CODE (HH7) Additional air conditioning in rear

Není k dispozici v jazyce „cs“; zobrazeno v jazyce Angličtina.

Zařazení

Funkční skupina 3 Nástavba › 83 Klimatizace › 83.50 Klimatizace v zadní části vozidla — Řada 901 (modely 67*) · Řada 902 (modely 67*) · Řada 903 (modely 67*)

EinPAS 39 Topení/větrání/chlazení › 39.15 Klimatizace › 39.15.32 Skříň/výměník tepla/výparník/filtr — Řada 901 (modely 67*) · Řada 902 (modely 67*) · Řada 903 (modely 67*)

AR83.50-D-6000NA

Remove/install evaporator unit for passenger compartment air conditioning

30.11.09

MODEL 901.67, 902.67, 903.67 with CODE (HH7) Additional air conditioning in rear

MODEL WD2, WD3, WD6, WD7 with CODE (HH7) Additional air conditioning in rear

Remove/install evaporator unit for passenger compartment air conditioning

D83.50-1103-09

1 Evaporator unit

2 Condensation hose

3 Screw

4 Damping washer

9 Expansion valve

10 Refrigerant line intake side

11 Plug connection

5 Washer

6 Sheet metal screw

7 Refrigerant line pressure side

8 Solenoid valve

Remove/install

Danger!

Risk of explosion caused by welding or soldering work on closed air conditioning system. Risk of poisoning caused by inhaling overheated refrigerant vapors. Risk of injury to skin and eyes caused by contact with liquid refrigerant.

Never perform welding work on or near a closed air conditioning system. No smoking or open flames. Wear safety glasses and protective gloves. Work only in well ventilated areas. Carry out repair work on the air conditioning system circuit only after the system has been discharged.

AS83.00-Z-0001-01A

Protect air conditioning circuit and components from moisture when carrying out repair work

AH83.30-N-0005-01A

1

Discharge air conditioning system

AR83.30-D-1760A

2

Remove evaporator unit paneling

AR83.50-D-5010NA

3

Unscrew refrigerant line (7) from solenoid valve (8)

Use new sealing ring. Coat sealing ring with refrigeration oil before installation.

*BA83.50-N-1001-01C

BB00.40-P-0362-00A

4

Detach refrigerant line (10) from expansion valve (9)

Use new sealing ring. Coat sealing ring with refrigeration oil before installation.

*BA83.50-N-1002-01C

BB00.40-P-0362-00A

5

Seal off condensation hose (2) on the left and right side of the evaporator unit

6

Disconnect connector (11) and lay aside cable bundles routed in the area of the evaporator unit

7

Unscrew sheet metal screws (6)

8

Support evaporator unit (1) and unscrew bolts (3) with washers (5) and damping washers (4)

*BA83.50-N-1003-01C

Use new damping washers (4).

9

Install in the reverse order

Only attach evaporator unit paneling after the air conditioning has been topped up and checked.

10

Evacuate the air conditioning system, refill it, and then check the system to make sure that it functions correctly and does not leak.

AR83.30-D-1760A

Rear air conditioning unit

Number

Designation

Model
901.67, 902.67,
903.67
with code HH7

Model
WD2/WD3
WD6/WD7
with code HH7

BA83.50-N-1001-01C

Refrigerant line to solenoid valve

Nm

16

16

BA83.50-N-1002-01C

Bolt, refrigerant lines to evaporator unit expansion valve

Nm

10

10

BA83.50-N-1003-01C

Bolt, evaporator unit to roof

Nm

20

20

Odkazované dokumenty