AR83.30-D-6540B | Install/remove condenser | 16.2.12 |
MODEL 901.6, 902.6, 903.6, 904.6, 905.6 with CODE (HH9) Regulated air conditioning (Tempmatic)
MODEL 690.6 with CODE (HH9) Regulated air conditioning (Tempmatic)
D83.30-1102-06
1 Capacitor
2 Refrigerant line (refrigerant compressor/condenser)
3 Refrigerant line (condenser/fluid reservoir)
4 Lower half of holder
5 Additional fan
6 Upper half of holder
7 additional fan connector
Modification notes
18.7.01 | Value changed from 21 (2) Nm to 17 Nm | Value modified to BA83.30-N-1003-02A for model 690.6 with codes HH6, HH9; models 901.6, 902.6, 903.6, 904.6 |
| Remove/install | ||
Danger! | Risk of explosion caused by welding or soldering work on closed air conditioning system. Risk of poisoning caused by inhaling overheated refrigerant vapors. Risk of injury to skin and eyes caused by contact with liquid refrigerant. | Never perform welding work on or near a closed air conditioning system. No smoking or open flames. Wear safety glasses and protective gloves. Work only in well ventilated areas. Carry out repair work on the air conditioning system circuit only after the system has been discharged. | |
Danger! | Risk of explosion caused by escaping oxyhydrogen gas. Risk of injury caused by caustic burns to eyes, skin and mucous membranes from battery electrolyte (contains diluted sulfuric acid) or metal spatter due to short circuit. Risk of burn injuries caused by short circuit. Risk of poisoning caused by swallowing battery electrolyte (contains diluted sulfuric acid) or absorption of lead over the skin or orifices | No fire, sparks, open flames or smoking. Wear acid-resistant gloves and clothing and safety glasses with side guards. Do not place any conductive objects on the battery and avoid any short circuit from battery positive to ground. Only fill liquid battery electrolyte (diluted sulfuric acid) into suitable and appropriately marked containers. | |
1 | Disconnect ground lead from battery | ||
| Notes on battery | All models | |
2 | Discharge air conditioning system | ||
| Protect air conditioning circuit and components from moisture when carrying out repair work | All models fitted with air conditioning | |
3 | Remove front bumper | ||
4 | Remove front grille | Model 901.6, 902.6, 903.6, 904.6, 905.6 up to model year 2003 Model 690.6 up to model year 2003 | |
Model 901.6, 902.6, 903.6, 904.6, 905.6 as of model year 2003 | |||
5 | Remove front end cross member | ||
6 | Disconnect refrigerant lines (2, 3) at the condenser (1) | Refrigerant line of condenser/fluid reservoir to condenser | |
7 | Disconnect additional fan connector (7). | ||
8 | Remove additional fan (5) together with upper holder (6) | ||
9 | Remove bottom bracket (4) | ||
10 | Disconnect condenser (1) from radiator | Installation: Top up compressor oil. Replace lower clips with clip fasteners. | |
| Compressor oils | Sheet 362.0 | |
11 | Install in the reverse order | ||
12 | Evacuate the air conditioning system, refill it, and then check the system to make sure that it functions correctly and does not leak. |
Refrigerant lines
Odkazované dokumenty
- ah5410p000101a Upozornění k akumulátoru
- ah5410p000101a
- ah8330n000501a Ochrana okruhu a součástí klimatizace při opravárenských pracích před vlhkostí
- ar8330d1760a
- ar8800d2115b
- ar8800d2115c
- ar8800d2302a
- ar8820d2000c
- as5410z000101a Nebezpečí požáru/exploze kvůli zkratu a unikajícímu výbušnému plynu. Nebezpečí popálení/poranění poleptáním očí, pokožky a sliznic elektrolytem / elektrolytovou mlhou akumulátoru při zkratu nebo následkem světelné
- as8300z000101a Nebezpečí exploze při svářečských nebo pájecích pracích na uzavřené klimatizaci. Nebezpečí otravy při vdechnutí přehřátých výparů chladiva. Nebezpečí poranění při kontaktu očí a kůže s tekutým chladivem
- bb0040p036200a Kompresorové oleje (specifikace 362.0)