Remove/install sliding door lock

AR72.16-D-4035A

2.10.98

MODEL 901.06 /36 /37 /46 /66 /67, 902.06 /07 /36 /37 /46 /47 /66 /67, 903.06 /07 /36 /37 /46 /47 /66 /67, 904.06 /36 /46 /66

MODEL WD1, WD2, WD3, WD6, WD7, YD1, YD2, YD3, YD4, YD5, YD6, YD7

MODEL 690.63/ 64

D72.16-1149-09

1 Door lock

2 Release cable

3 Bolt

7 Sliding door stop

8 Bolt

9 Connector

4 Door paneling

5 Inside door opener

6 Cross-head screw

 	Remove/Install
1	Remove sliding door	On freezer vehicle or refrigerator vehicle, code ZA5 or ZA8	AR72.16-D-1260B
2	Remove sliding door stop (7)	On freezer vehicle or refrigerator vehicle, code ZA5 or ZA8  Installation: Replace bolt (6).
			*BA72.16-N-1009-01A
3	Remove inside door opener		*BA72.16-N-1002-01A
4.1	Remove door paneling (4) on sliding door	Except freezer vehicle or refrigerator vehicle, code ZA5 or ZA
4.2	Remove insulating element for sliding door	On freezer vehicle or refrigerator vehicle, code ZA5 or ZA8	AR83.65-D-2270A
5	Disconnect connector (9) for rotary tumbler switch	On vehicles with central locking, code FZ0, FZ1 or code FY6  Installation: Observe routing of electric leads.
6	Unscrew bolts (3) on door lock (1)	 Installation: Replace self-locking bolts (3).
			*000589011000
			*BA72.16-N-1006-01A
7	Remove door lock (1) from sliding door.
8	Detach release cable (2) at door lock (1).
9	Install in the reverse order

 Sliding doors

Number	Designation			Models 690.6, 901, 902, 903, 904	Model WD1/WD2/ WD3/WD6/ WD7/YD1/ YD2/YD3/ YD4/YD5/ YD6/YD7


BA72.16-N-1002-01A	Bolt for inner actuation on sliding door		Nm	10	10
BA72.16-N-1006-01A	Bolt for outer door lock on sliding door		Nm	10	10
BA72.16-N-1009-01A	Bolt for sliding door stop on sliding door	8.8	Nm	10	10
		10.9	Nm	–	–

000 589 01 10 00

Torx bit set