Remove/install headliner

AR68.30-P-4300TB

Remove/install headliner

25.7.06

1.3.06

Remove paneling changed in disconnect

Operation steps 6, 8, 11,

 

Remove/install



Note on function reliability of windowbag

AH91.60-P-0693-01A

1

Operate parking brake

2

Remove edge guard (1) from left front door cutout

3

Remove paneling from left A-pillar

AR68.30-P-4050T

4

Remove grab handle from roof on left front

AR68.30-P-4330T

5

Remove edge guard (2) from left rear door cutout

6

Loosen paneling from left B-pillar

 Do not remove belt end fitting.

AR68.30-P-4700T

7

Remove grab handle from left rear of roof

AR68.30-P-4330T

8

Loosen paneling from left C-pillar

 Do not remove belt end fitting.

AR68.30-P-4490T

9

Remove edge guard (2) from right rear door cutout

10

Remove grab handle from right rear of roof

AR68.30-P-4330T

11

Loosen paneling from right C-pillar

 Do not remove belt end fitting.

AR68.30-P-4490T

12

Remove edge guard (1) from right front door cutout

13

Remove grab handle from right front of roof

AR68.30-P-4330T

14

Remove paneling from right B-pillar

AR68.30-P-4700T

15

Remove paneling on right A-pillar

AR68.30-P-4050T

16

Move driver and passenger seats all the way toward rear and fold backrests downward

17

Remove overhead control panel control unit

AR82.20-P-1000T

18

Unscrew screws (8) and remove inside rearview mirror carrier (7) from headliner (6).

19

Remove left and right sun visors (9)

20

Remove left and right dome lamp in rear

AR82.20-P-0113TA

21

Remove left antenna amplifier module

AR82.62-P-8300T

22

Unscrew nuts (4) and loosen left paneling in rear (3) until electrical connectors (5) on wiring harness (10) are accessible.

23

Remove wiring harness (10) from body.

24

Disconnect electrical connectors (5) from wiring harness (10)

 Number of electrical connectors (5) according to equipment.

25

Move shift lever or selector lever toward rear.

 On vehicles with transmission 722.6 it is necessary to release the selector, see: 



Function of shift lock override

GF27.10-P-3023T

26

Cover area of center console connection (A), area of right front door cutout (B) and area of B-pillar/headliner (D) with suitable means or mask

27

Unscrew screws (13) for headliner (6) from roof

28

Pull centering bolt (12) for headliner (6) out of roof and slide headliner (6) toward rear

29

Slightly lower headliner (6) and pull out of rear edge of roof toward front

 Installation: Move clip (11) into roof paneling. Ensure that headliner (6) is seated properly.

30

Lay headliner (6) down in vehicle

31

Move headliner (6) between driver's seat backrest and B-pillar, then between gearshift bracket and instrument panel center section connection.

 Remove headliner (6) carefully because strong deformation can lead to damage.

 Aid of helper required.

32

Remove headliner (6) through passenger door and lay down on clean surface

 Aid of helper required.

33.1

Prepare roof paneling (6) for installation

When replacing roof paneling (6).

AR68.30-P-4305T

34

Install in the reverse order