P68.30-2145-06
1 Headliner
2 Inside rearview mirror
3 Rail
4 Mount
| Removal, installation | ||
1.1 | Open sliding/pop-up roof panel | Electric sliding/pop-up roof (code 414a) | |
2 | Remove inside mirror (2) | Pull inside rearview mirror vertically downward with force on one side and remove (arrow). Installation: Position inside rearview mirror on one side and press upward until it catches securely. | |
3 | Remove overhead control panel control module | ||
4 | Remove sun visors | ||
5 | Unscrew screw from mounting bracket for left and right sun visors | ||
6 | Remove rear dome lamp | ||
7 | Remove grab handles on side (4 each) | ||
8 | Remove load anchors (4 each) | ||
9 | Pull edge guard off of front and rear door cutout in area of headliner (1) | ||
10 | Remove paneling from A-pillar on left and right | ||
11 | Remove paneling from B-pillar on left and right | Do not remove seat belt end fitting | |
12 | Remove paneling from C-pillar on left and right | Do not remove seat belt end fitting | |
13 | Remove rear roof frame paneling | ||
14 | Lay down backrests of front seats | ||
15 | Remove head restraints of rear seats | ||
16.1 | Remove rail (3) | Electric sliding/pop-up roof (code 414a) | |
17.1 | Unhook headliner (1) from sliding/pop-up roof frame at rear (arrows) | Electric sliding/pop-up roof (code 414a) | |
18 | Slide headliner (1) toward front | Unhook both mounts (4) from sliding roof frame. | |
19 | Remove headliner (1) and take out through rear door. | ||
20 | Install in opposite order |