P68.30-0244-09
1 Paneling (B-pillar)
2 Paneling (longitudinal member)
3 Retaining clamp
4 Belt end fitting
5 Screw
6 Locking pawl
7 Pin
8 Pushbutton
9 Mount
| Removing | ||
1 | Remove edge guard in area of paneling (1) | ||
2 | Unlock retaining clips (3) from paneling (1) with screwdriver | ||
3 | Pull paneling (1) upward out of longitudinal member panel (2) | ||
4 | Remove bolt (5) from seat belt end fitting (4) | ||
5 | Remove belt from paneling (1) and lay down paneling (1) | ||
| Install | ||
6 | Check retaining clips (3, 4 each) at upper section of B-pillar | ||
7 | Guide belt end fitting (4) through opening in paneling (1) | ||
8 | Insert paneling (1) into insert profile on longitudinal member panel (2) | ||
9 | Guide bolt (7) and lock pawl (6) into mount (9) or button (8) on paneling (1) | ||
10 | Clip paneling (1) into retaining clips (3) | ||
11 | Screw belt end fitting (4) to driver seat with bolt (5) so that it still can be moved | | |
12 | Install edge guard on B-pillar | ||
13 | Check adjustable upper belt guide fitting on B-pillar for proper function | It should be possible to adjust and arrest the belt guide bracket on the B-pillar in three positions (top-center-bottom) |
Seat belts/emergency tensioning retractors