ar6110d0008a

Remove/install bracket for ABS unit

Typ ar · téma 61.10 · verze 0115 · 2019-05-20

Platí pro: Model 901.0##/3##/4## ## up to 718187, 902.0##/3##/4## ## up to 718187, 903.0##/3##/4## ## up to 718187, 904.0##/3##/4## ## up to 718187 with code BB0 (Antilock brake system (ABS))

Není k dispozici v jazyce „cs“; zobrazeno v jazyce Angličtina.

Zařazení

Funkční skupina 3 Nástavba › 61 Spodní část vozidla › 61.10 Rámová podlaha — Řada 901 (modely 0**, 3**, 4**) · Řada 902 (modely 0**, 3**, 4**) · Řada 903 (modely 0**, 3**, 4**) · Řada 904 (modely 0**, 3**, 4**)

EinPAS 35 Karoserie/rám/montované díly › 35.32 Podvozek › 35.32.35 Podlahová skupina/žebroví podvozku — Řada 901 (modely 0**, 3**, 4**) · Řada 902 (modely 0**, 3**, 4**) · Řada 903 (modely 0**, 3**, 4**) · Řada 904 (modely 0**, 3**, 4**)

AR61.10-D-0008A

Remove/install bracket for ABS unit

14.05.2019

Model

901.0##/3##/4## ## up to 718187, 902.0##/3##/4## ## up to 718187, 903.0##/3##/4## ## up to 718187, 904.0##/3##/4## ## up to 718187

with code BB0 (Antilock brake system (ABS))

Remove/install bracket for ABS unit

1

Bracket

A

Range

a

Interval 30 mm

D61.10-0073-06

Remove

Warning

Risk of injury caused by performing testing or repair work on airbag or emergency tensioning retractor units.

Store airbag units with deployment side facing up; do not expose to temperatures greater than 100 °C. When working on these units, disconnect the power supply.

AS91.00-Z-0001-01D

Topical note

Notes on performing repair, body work and welding on vehicles with airbags and RTE units

AH91.00-P-0002-01M

Topical note

General information on body repair

AH60.00-N-0001-01A

1

Remove hydraulic unit

AR42.30-D-8601A

2

Remove detachable parts in repair area

3

Cover all detachable parts that remain in the repair area

4

Expose and grind down weld seams in the area A

5

Remove bracket (1)

6

Grind off the connecting plates and coat them with zinc dust paint

Zinc dust paint suitable for spot welding

Zinc dust paint suitable for spot welding

*BR00.45-Z-1001-07A

Install

7

Grind off both sides of the bracket (1) in the marked areas and coat it with zinc dust paint

Zinc dust paint suitable for spot welding

Zinc dust paint suitable for spot welding

*BR00.45-Z-1001-07A

8

Position and align the bracket (1) at a distance a=30 mm from the edge (arrow)

Danger

The high voltage used for electric welding presents a lethal hazard. Risk of explosion from welding in areas close to highly inflammable materials. Risk of injury from weld splatter and UV-light when welding. Risk of poisoning from inhaling welding gases

Use insulating mats. Wear protective clothing, safety glasses and a protective mask. Remove highly inflammable materials from the hazard area. Use air extraction system.

AS00.00-Z-0007-01A

9

Weld the bracket (1) to the body ( )

Topical note

Measures for preventing damage to vehicles or components when performing electric welding work

AH00.00-N-0005-01A

General notes on welding

AH60.00-N-0005-01A

10

Vacuum out hollow cavities


Metal shavings and metal grinding dust in hollow cavities
can lead to corrosion damage.

11

Clean areas repaired and priming with MB primer filler

12

Supplement standard underfloor protection with MB permanent underbody sealant

13

Paint repair area adjacent surfaces

14

Install hydraulic unit

AR42.30-D-8601A

15

Reinstall all other detachable parts removed

Repair materials

Number

Designation

Order number

BR00.45-Z-1001-07A

Zinc dust paint suitable for spot welding

A 000 986 34 42

Odkazované dokumenty