Modification notes
Test values for distance and comparison measurement on front axle
Number | Designation | Model | ||
BE40.30-P-1001-06D | Dimension | V1 | mm | 2 |
V2 | mm | 2 | ||
V3 | mm | 1,5 | ||
V5 | mm | - | ||
V6 | mm | - | ||
V7 | mm | - | ||
V8 | mm | 802.5 (3 ) | ||
V9 | mm | - | ||
V10 | mm | 2 | ||
See picture in | ||||
170 589 00 63 00
168 589 07 63 00
124 589 01 19 00
124 589 02 19 00
Mount
Telescopic measuring rod
Telescopic measuring rod
Set of measurement fixtures
124 589 08 63 00
Connecting pieces
The measuring fixture set 168 589 07 63 00 is designed in such a way, that the measuring bolts, according to the measuring points at the vehicle, can be screwed together out of mounting bolts, extensions and measuring tips.
The configuration of the measuring bolts is shown in the table, where the numbers in the column headed "Measuring bolt configuration" are the special tool end numbers.
For example: 02/06/10 = 168 589 07 63 02 (support stud)
168 589 07 63 06 (extension)
168 589 07 63 10 (measuring tip)
Distance and comparison measurement | Measuring bolt configuration | Telescopic measuring rod |
V1 | 02/08/05/socket wrench bit | 124 589 01 19 00 |
V2 | 02/08//06/05/Socket | 124 589 02 19 00 |
V3 | 02/07/10 | 124 589 02 19 00 |
V8 | 02/08/05/socket wrench bit | 124 589 01 19 00 |
V10 | Front: 02/08/05/socket wrench bit Rear: 02/07/05/socket wrench bit | 124 589 02 19 00 |
P40.30-2166-11
1 Comparison dimension "V1", measured from left to right from the check bore "K" to the mounting bolt of the front axle carrier at the rear.
P40.30-2167-11
2 Comparison dimension "V2", measured from left to right from the check bore "K" to the mounting bolt of the front axle carrier at the front.
P40.30-2168-11
3 Comparison dimension "V3", measured from the check bore "K" to the center of the mounting bolt of the rear mount at the lower transverse control arm, left to right.
P40.30-2169-11
4 Distance measurement "V8" measured to the centers of the torx bolt heads between the rear mountings of the front axle carrier.
P40.30-2170-06
5 Comparison dimension "V10", measured diagonally to the center of the Torx bolt heads between the front and rear supports for the front axle carrier, left to right.