AR40.30-P-0400AK | Checking accident vehicles and vehicles possibly damaged in an accident | 1.12.10 |
MODEL 169.0 /3, 245.2 (except , 245.286)
| Check | ||
1 | Check lower transverse control arm of front axle and inspect front axle carrier for visible signs of damage | If there is visible damage, e.g. cracks or deformation, these parts must be replaced Refer to: | |
Remove/install lower wishbone | |||
Remove/install front axle carrier | |||
2 | Check rear axle carrier, coupling bearing and Watt strut for visible damage | If there is visible damage, e.g. cracks or deformation, these parts must be replaced Refer to: | |
Removing and installing complete rear axle | |||
Remove/install coupling bearing on rear axle | |||
Remove/install Watt strut on rear axle | |||
3 | Perform chassis alignment | Distance and comparative measurements are to be carried out if a definite diagnosis is not possible following the chassis alignment. | |
4 | Carry out distance and comparative measurements on front and rear axles | These measurements determine whether it is necessary to replace chassis components or repair the body on the straightening bench. Assessment is based on either the difference between the left and right distance dimension or by comparing the distance dimension with a comparable vehicle. If distance and comparative measurements do not provide a definite diagnosis, then examine the vehicle on the straightening bench for damage, or replace the steering knuckle. Refer to: | |
Remove/install steering knuckle |