Není k dispozici v jazyce „cs“; zobrazeno v jazyce Angličtina.
Zařazení
Funkční skupina 2 Podvozek › 40 Kola, měření geometrie podvozku › 40.20 Měření geometrie podvozku — Řada 909
EinPAS 20 Podvozek › 20.10 Měření podvozku › 20.10.20 Diagnostika/zkouška/proměření/nastavení — Řada 909
AR40.20-D-0200-01F
Determining specified caster value with nomogram
MODEL
909
Measuring points for determining specified caster value
1
Measure dimension "A" and dimension "B" from road surface up to under the longitudinal frame member.
Dimensions: d = 350 mm
D40.20-0045-05
Nomogram for determining specified caster value
2
Subtract dimension "A" from dimension "B" and mark the resulting dimension "C" on the corresponding straight lines on the nomogram for the wheelbase and read off the specified value for the level.
Example: Vehicle with wheelbase 3550 mm (e): - Dimension "A" = 360 mm - Dimension "B" = 505 mm Dimension "A" = 360 mm is subtracted from dimension "B" = 505 mm. This yields the result for dimension "C" = 145 mm. An entered dimension "C" in the nomogram results in a specified caster value of 0° 28'.
