Crown wheel and pinion with differential gear
Number | Designation | Rear axle | Rear axle | |||
BA35.30-N-1004-03H | Collared nut, coupling flange to drive pinion | M40x1.5 | Nm | 500 | - | |
BA35.30-N-1006-03H | Collared nut, coupling flange to drive pinion | M50x1.5 | Nm | - | 900 | |
Crown wheel and pinion with differential gear
Number | Designation | Rear axle | |||
BA35.30-N-1004-03H | Collared nut, coupling flange to drive pinion | M40x1.5 | Nm | 600 | |
BA35.30-N-1005-03H | Collared nut, coupling flange to drive pinion | M45x1.5 | Nm | 850 | |
000 589 78 63 00
Retaining wrench
Ratio wrench
Wrench socket
001 589 75 09 00
717 589 00 31 00
T35.30-0008-01
1 Lubricate gearing of drive pinion with gear oil.
2 Attach propshaft flange to drive pinion.
3 Position collared nut.
Collared nut must be replaced.
4 Bolt retaining wrench (1) onto propshaft flange.
5 Position socket wrench bit (2) and ratio wrench (3).
T35.30-0023-01
6 Press propshaft flange onto drive pinion gear shaft by tightening collared nut and then bolt securely into position .
7 Remove retaining wrench (1) from propshaft flange.
8 Lock collared nut when tightened (arrow).
Use suitable drift to fold over locking collar of collared nut into groove provided at end of drive pinion gear shaft.