AR28.55-P-1015A | Dismantle, assemble gear pump | 24.11.08 |
MODEL 460, 461 with TRANSFER CASE 750.60# ## up to 033522
P28.10-2109-06
| Disassemble | ||
1 | Remove transfer case oil pump | ||
Socket wrench bit | |||
Retainer wrench | |||
Puller | |||
2 | Unscrew bolts and remove housing section | ||
3 | Remove both pump gears | ||
4 | Clean all parts, check and replace if necessary | ||
| Assemble | ||
5 | Install both pump gears | ||
6 | Bolt together housing sections | ||
7 | Install oil pump on transfer case | The assembled oil pump is positioned in the bearing cover and the housing sections aligned with each other | |
| |||
Dial indicator | |||
Steel straightedge | |||
Gage stand | |||
Drift |
Test values for transfer case gear set, shafts
Number | Designation | Model 460, 461 | |
BE28.50-P-1003-01A | Axial play of front tapered roller bearing in rear axle output shaft | mm | 0 (0.025) |
460 589 00 21 00
Drift
Steel straightedge
Dial indicator
001 589 53 21 00
460 589 06 15 00
363 589 02 21 00
Dial indicator holder
460 589 01 31 00
Puller
Retaining wrench
Socket wrench bit
001 589 16 09 00
460 589 02 33 00