ar2760d1155a

Check regulator pressure

Typ ar · téma 27.60 · verze 0108 · 2010-01-21

Platí pro: TRANSMISSION 722.330 in MODEL 901.3, 902.3, 903.3 with ENGINE 601.943 TRANSMISSION 722.375 in MODEL 901.4, 902.4, 903.4, 904.4 with ENGINE 602.980 TRANSMISSION 722.376 in MODEL 901.06, 902.0, 903.0, 904.0 with ENGINE 111.979 TRANSMISSION 722.337 in MODEL 903.312 /362 with ENGINE 601.943 with CODE (Z22) Post freight delivery service TRANSMISSION 722.332 in MODEL 903.462 /463 with ENGINE 602.980 with CODE (ZB2) FedEx package

Není k dispozici v jazyce „cs“; zobrazeno v jazyce Angličtina.

Zařazení

Funkční skupina 2 Podvozek › 27 Automatická převodovka › 27.60 Řazení, ovládání — Řada 601 (modely 943) · Řada 602 (modely 980) · Řada 901 (modely 06*, 3**, 4**) · Řada 902 (modely 0**, 3**, 4**) · Řada 903 (modely 0**, 3**, 312, 362, 4**, 462, 463) · Řada 904 (modely 0**, 4**)

EinPAS 17 Hnací ústrojí/náprava › 17.20 Převodovka › 17.20.1 Základní informace — Řada 601 (modely 943) · Řada 602 (modely 980) · Řada 901 (modely 06*, 3**, 4**) · Řada 902 (modely 0**, 3**, 4**) · Řada 903 (modely 0**, 3**, 312, 362, 4**, 462, 463) · Řada 904 (modely 0**, 4**)

Platí také pro motory/převodovky: 111 979, 722 330, 722 332, 722 337, 722 375, 722 376

AR27.60-D-1155A

Check regulator pressure

12.1.10

TRANSMISSION 722.330 in MODEL 901.3, 902.3, 903.3 with ENGINE 601.943

TRANSMISSION 722.375 in MODEL 901.4, 902.4, 903.4, 904.4 with ENGINE 602.980

TRANSMISSION 722.376 in MODEL 901.06, 902.0, 903.0, 904.0 with ENGINE 111.979

TRANSMISSION 722.337 in MODEL 903.312 /362 with ENGINE 601.943 with CODE (Z22) Post freight delivery service

TRANSMISSION 722.332 in MODEL 903.462 /463 with ENGINE 602.980 with CODE (ZB2) FedEx package

Check regulator pressure

D27.10-0011-06

4 Banjo bolt

5 Sealing ring

7 Measuring instrument pressure line

R Test connection for regulator pressure
(measuring range up to 10 bar).

Check

The regulator pressure acts on the command valves and actuates the upshifts.

The regulator pressure is regulated by the centrifugal governor.

The pressure level varies depending on the centrifugal force, i.e., the pressure rises and falls depending on the vehicle speed.

1

Check vacuum control.

AR27.18-D-1200A

2

Heat transmission up to operating temperature.

3

Correct oil level in transmission

AR27.00-D-0100A

4

Connect test equipment for regulator pressure.

Measuring range up to 10 bar.

Remove screw plug (R) with sealing ring (5) for test connection for regulator pressure.

Connect pressure line (7) of test equipment with banjo bolt (4) and sealing rings (5) to test connection modulating pressure.

Replace sealing ring.

*123589042100

*BA27.40-N-1002-01B

Measure with pointer instrument

5

On the roller dynamometer drive at the speeds specified in the tables and read off pressure values.

When fastening the test equipment in the cab, the difference in height from the test equipment to the transmission means that 0.1 bar for each meter must be added to the pressure value readings.

If no regulator pressure is displayed or if the pressure values deviate from the values specified in the tables, the centrifugal governor must be cleaned or replaced.

Remove/install centrifugal governor

AR27.10-D-0280A

6

Disconnect measuring instrument in reverse order.


Replace all sealing rings.

*BA27.40-N-1002-01B

Housing

Number

Designation

Transmission 722.330/332
/337/375/376

BA27.40-N-1002-01B

Screw plug for measuring points for modulating pressure, control pressure and working pressure

Nm

13

Check regulator pressure

123 589 04 21 00

Tester

Odkazované dokumenty