ar2710d0280a

Removing and installing centrifugal governor

Typ ar · téma 27.10 · verze 0104 · 1999-10-01

Platí pro: TRANSMISSION 722.330 in MODEL 901.3, 902.3, 903.3 with ENGINE 601.943 TRANSMISSION 722.375 in MODEL 901.4, 902.4, 903.4, 904.4 with ENGINE 602.980 TRANSMISSION 722.376 in MODEL 901.06, 902.0, 903.0, 904.0 with ENGINE 111.979 TRANSMISSION 722.337 in MODEL 903.312 /362 with ENGINE 601.943 with CODE (Z22) Freight delivery service for post office TRANSMISSION 722.332 in MODEL 903.462 /463 with ENGINE 602.980 with CODE (ZB2) FedEx supply

Není k dispozici v jazyce „cs“; zobrazeno v jazyce Angličtina.

Zařazení

Funkční skupina 2 Podvozek › 27 Automatická převodovka › 27.10 Převodovka kompletní — Řada 601 (modely 943) · Řada 602 (modely 980) · Řada 901 (modely 06*, 3**, 4**) · Řada 902 (modely 0**, 3**, 4**) · Řada 903 (modely 0**, 3**, 312, 362, 4**, 462, 463) · Řada 904 (modely 0**, 4**)

EinPAS 17 Hnací ústrojí/náprava › 17.20 Převodovka › 17.20.34 Řazení převodů — Řada 601 (modely 943) · Řada 602 (modely 980) · Řada 901 (modely 06*, 3**, 4**) · Řada 902 (modely 0**, 3**, 4**) · Řada 903 (modely 0**, 3**, 312, 362, 4**, 462, 463) · Řada 904 (modely 0**, 4**)

Platí také pro motory/převodovky: 111 979, 722 330, 722 332, 722 337, 722 375, 722 376

AR27.10-D-0280A

Removing and installing centrifugal governor

16.2.96

TRANSMISSION 722.330 in MODEL 901.3, 902.3, 903.3 with ENGINE 601.943

TRANSMISSION 722.375 in MODEL 901.4, 902.4, 903.4, 904.4 with ENGINE 602.980

TRANSMISSION 722.376 in MODEL 901.06, 902.0, 903.0, 904.0 with ENGINE 111.979

TRANSMISSION 722.337 in MODEL 903.312 /362 with ENGINE 601.943 with CODE (Z22) Freight delivery service for post office

TRANSMISSION 722.332 in MODEL 903.462 /463 with ENGINE 602.980 with CODE (ZB2) FedEx supply

Removing and installing centrifugal governor

D27.10-0028-09

Removing and installing centrifugal governor

D27.10-0029-09

A Removing

B Installing

Removal, installation

1

Unhook selector lever control cable on automatic transmission

AR27.60-D-0100-02A

2

Remove plug on starter lock-out switch.

Turn locking device upwards (arrow) and carefully press off the plug using two screwdrivers (arrows).

3

Press in cover (4) gently, remove snap ring (6) and pull out cover (4).

4

Loosen hexagon nut (7) of axial bracket (8).

5

Turn axial bracket (8) away to the left at the slot (A) (direction of arrow).

6

Remove sealing ring (5) and pull out centrifugal governor (3).

Checking

7

Check regulating valve (11) for ease of movement.

If the centrifugal governor (3) is defective, the old helical gear (2) is to be used.

AR27.10-D-0280-02A

Change over helical gear on centrifugal governor.

AR27.10-D-0280-05A

*000589523700

Installing

8

Install helical gear (2) so that the driving pin engages in the helical gear bore.

9

Install snap ring (1)

10

Install centrifugal governor (3)

Replace sealing ring (5)

11

Turn axial bracket (8) at slot (A) to the right (direction of arrow) as far as the stop.

The axial bracket is correctly installed when the slot (A) is horizontal.

12

Tighten hexagon nut (7) of axial bracket (8).

13

Insert cover (4), press in and install snap ring (6).

Once the snap ring is inserted, the cover must be moved back until it abuts the snap ring

14

Connect plug to starter lock-out switch

Turn locking device downwards in direction of arrow.

15

Hook in selector lever control cable on automatic transmission

AR27.60-D-0100-02A

Removing and installing centrifugal governor

000 589 52 37 00

Pliers

Odkazované dokumenty