Remove/install bearing liner of gearshift

AR26.60-S-6625A

4.12.09

ENGINES 111.948 /950 /978 /980, 601.942 /970, 611.980 in MODEL 638 except CODE (G40) Automatic transmission

S26.60-3018-06

Illustration shows model 638.0/1 with engine 111.948/978 and 601.

1 Retaining spring

2 Bolts

3 Ball sockets

4 Bearing liner

 	Remove/install
1	Remove center instrument panel cover		AR68.10-S-3430A
2	Remove ashtray		AR82.00-S-9999A
3	Remove ball sockets (3) for shift cables on ball heads of relay lever
4	Remove retaining springs (1) on shift cables
5	Remove bolts (2) from transverse tube frame	 Installation: Install new bolts.
		 Engine 111	*BA26.60-N-1001-01I
		 Engine 601, 611	*BA26.60-N-1001-01J
6	Remove bearing liner (4) upwards	Do not mix up shift cables. Route shift cables out of mounting holes.
7	Install in the reverse order
	Checking
8	Check shift adjustment, adjust if necessary		AR26.60-S-6420A

 Shift mechanism

Number	Designation		Model 638 with engine 111.948/978 without Code G40	Model 638 with engine 111.950/980 without code G40


BA26.60-N-1001-01I	Bolt, bearing liner to transverse pipe	Nm	27	27

 Shift mechanism

Number	Designation		Model 638 with engine 601.942/970 without code G40	Model 638 with engine 611.980 without Code G40


BA26.60-N-1001-01J	Bolt, bearing liner to transverse pipe	Nm	27	27