S82.00-2501-06
1 Bolt
2 Lamp base
3 Ashtray bottom section
4 Ashtray top section
5 Plug-in wiring connection
E17 Cigar lighter
| Removing, installing | ||
1 | Unscrew screws (1) | Do not damage center console. | |
Screws are only accessible after opening ashtray. | |||
2 | Unclip ashtray at side and pull out upward | ||
3 | Unclip ashtray bottom section (3) from ashtray top section (4) | Carefully bend lugs outward at marked point.For this purpose do not open ashtray bottom section completely up to arresting point. | |
4 | Disconnect electrical connector (5) | ||
5 | Remove lamp base (2) | Carefully pry out lamp base (2) by pressing from side. | |
6 | Remove cigarette lighter (E17) | ||
7 | Install in the reverse order |