Remove/install main shaft and countershaft

AR26.50-B-0001B

Remove/install main shaft and countershaft

12.02.16



Remove and install

Danger!

Risk of injury on skin and eyes by handling hot or incandescent objects

Wear gloves, clothes and protection glasses.

AS00.00-B-0002-01A

1

Remove the gearbox rear part

AR26.40-B-2475B

2

Remove the gearbox front housing

AR26.40-B-2470C

3

Remove the input shaft (1)

4

Unscrew the bolt (3) and remover the oil catcher (2)



*BA26.40-B-1016-01C

5

Remove the bolt (4) and the lock of the reverse gear intermediate gear shaft



*BA26.40-B-1017-01C

6

Utilizing an appropriate mandrel, remove the reverse gear intermediate gear shaft (5)

Install: Heat-up the housing of the shaft (5) before assembling it

7

Remove the intermediate reverse gear (6) together with its bearings

Install: Lightly lubricate the bearings before installing them

8

Remove the countershaft, utilizing a hook of own manufacture

9

Remove the actuation fork of the 3rd/4th gears (7) together with the shifting sleeve

Cover the shifting sleeve with a cloth, as the pressing pieces may be cast by spring action of the same

10

Remove the central selector bar (8)

11

With an appropriate punch, remove the lock pins (9) from the selector bar of the 1st/2nd gears

12

Remove the selector bar of the 1st/2nd gears (10)

Install: before this assembly make sure the selector of the reverse gear/9th gear (11) is in neutral position

13

Remove the main shaft. Will be removed, also, the selector bar of the reverse gear/9th gear (11)

Install: before beginning the assembly, check the position of the selector bars lock-pins. They must be so that they do not impede the assembly of the selector bars



*710589036300

14

Install in reverse order

Número

Denominação

Gearboxes 718.19

BA26.40-B-1016-01C

Oil collector “Allen” bolts

Nm

23

BA26.40-B-1017-01C

Reverse gear axle locking-plate bolts

Nm

25