Remove/install bearing cap · ar2630s3200a · Mercedes-Benz WIS

AR26.30-S-3200A

Remove/install bearing cap

27.2.12

ENGINES 111.948 /950 /978 /980, 601.942 /970, 611.980 in MODEL 638 except CODE (G40) Automatic transmission

S26.30-3000-06

1 Bearing cap

2 Oil guide (drive shaft)

3 Oil guide (output shaft)

4 Screw

 	Remove/install
1	Remove bottom section of soundproofing		AR94.30-S-5300A
2	Unscrew and remove bearing cap (1) with oil guides (2, 3)	 Coat the thread of the bolts (4) with thread locking compound
		 Engine 111	*BA26.40-N-1006-01I
		Engine 601, 611	*BA26.40-N-1006-01J
		Loctite 243	*BR00.45-Z-1133-02A
3	Remove oil guides (2, 3) from bearing cap (1)	 The tabs of the oil guides (2, 3) must engage in the notches (arrows) in the bearing cap (1).
4	Clean sealing surfaces	 Coat sealing surfaces of the bearing cap (1) with sealant.
		Sealant	*BR00.45-Z-1009-01A
	Checking
5	Check oil level		AP26.00-D-2601A

 Transmission housing

Number	Designation		Model 638 with engine 111.948/978 without Code G40	Model 638 with engine 111.950/980 without code G40


BA26.40-N-1006-01I	Bearing cap to transmission housing	Nm	23	23

 Transmission housing

Number	Designation		Model 638 with engine 601.942/970 without code G40	Model 638 with engine 611.980 without Code G40


BA26.40-N-1006-01J	Bearing cap to transmission housing	Nm	23	23

Repair materials