AR20.10-T-2460B | Remove, install coolant thermostat | 28.4.00 |
ENGINE 441.980 in MODEL 613.355 /364 /365
ENGINES 402.970, 446.938 in MODELS 613.455 /485
T20.10-0013-01
1 Coolant hose
2 Housing cover of coolant thermostat
3 Coolant thermostat
4 Sealing ring
T20.10-0014-01
| Removal, installation | ||
Danger! | Risk of injury to skin and eyes suffering scalding from contact with hot coolant spray. Risk of poisoning from swallowing coolant. | Do not open cooling system unless coolant temperature is below 90 °C. Open cap slowly and release the pressure. Do not pour coolant into beverage bottles. Wear protective gloves, protective clothing and eye protection. | |
1 | Drain coolant | ||
| Notes on coolant | ||
| Engine cooling system - inspect fluid level, adjust to correct level. Inspect anticorrosion/antifreeze protection, adjust to correct concentration | ||
2 | Open rear flap | ||
3 | Detach coolant hose (1) from housing cover of coolant thermostat (2) | ||
4 | Take off housing cover of coolant thermostat (2) | | |
5 | Remove coolant thermostat (3) | Installation: The arrow markings on the coolant thermostat must be pointing up. Replace seals (4). | |
6 | Install in the reverse order |
Coolant pump, coolant thermostat
Odkazované dokumenty
- ah2000n208001a Upozornění ke chladicí kapalině
- ap2000t2010a Zkontrolovat, vyrovnat hladinu chladicí kapaliny systému chlazení motoru. Kontrola, vyrovnání (hladiny) antikorozního/nemrznoucího prostředku
- as2000z000101a Nebezpečí poranění kůže a očí opařením vystřikující, horkou chladicí kapalinou. Nebezpečí otravy při požití chladicí kapaliny