ar1830d3481a

Remove/install oil-water heat exchanger at oil filter

Typ ar · téma 18.30 · verze 0106 · 2009-11-20

Platí pro: ENGINE 611.981 /987 in MODEL 901.6, 902.6, 903.6, 904.6 ENGINE 612.981 in MODEL 902.6, 903.6, 904.6, 905.6 ENGINE 611.983 in MODEL 690.6

Není k dispozici v jazyce „cs“; zobrazeno v jazyce Angličtina.

Zařazení

Funkční skupina 1 Motor › 18 Mazání motoru, chlazení motorového oleje › 18.30 Chlazení oleje — Řada 611 (modely 981, 983, 987) · Řada 690 (modely 6**) · Řada 901 (modely 6**) · Řada 902 (modely 6**) · Řada 903 (modely 6**) · Řada 904 (modely 6**) · Řada 905 (modely 6**)

EinPAS 15 Motor › 15.20 Soustava mazání motoru › 15.20.31 Filtr/chlazení/termostat/ventilátor/nádržka — Řada 611 (modely 981, 983, 987) · Řada 690 (modely 6**) · Řada 901 (modely 6**) · Řada 902 (modely 6**) · Řada 903 (modely 6**) · Řada 904 (modely 6**) · Řada 905 (modely 6**)

Platí také pro motory/převodovky: 612 981

AR18.30-D-3481A

Remove/install oil-water heat exchanger at oil filter

6.11.09

ENGINE 611.981 /987 in MODEL 901.6, 902.6, 903.6, 904.6

ENGINE 612.981 in MODEL 902.6, 903.6, 904.6, 905.6

ENGINE 611.983 in MODEL 690.6

Remove/install oil-water heat exchanger at oil filter

D18.30-0004-05

Shown on engine 611

1 Oil/water heat exchanger

2 Hose clamp

3 Coolant hose

4 Bolt

5 Gasket

6 Cover

7 Oil filter element

Remove/install

Danger!

Risk of injury to skin and eyes caused by scalding from contact with hot coolant spray. Risk of poisoning caused by swallowing coolant.

Do not open cooling system unless coolant temperature is below 90°C. Open cap slowly and release the pressure. Do not pour coolant into beverage containers.

Wear protective gloves, protective clothing and safety glasses.

AS20.00-Z-0001-01A

1

Drain/fill in coolant

At radiator

AR20.00-D-1142A

2

Unscrew cap (6) at oil filter housing

Take out oil filter element (5) to allow engine oil to flow off into the oil pan

*103589020900

*BA18.20-P-1002-01G

3

Detach coolant hose (2) at oil-water heat exchanger (1)

4

Detach oil-water heat exchanger (1) at timing case cover

Installation: Clean sealing surfaces

Install new gasket (3).

*BA18.30-P-1001-01C

5

Install in the reverse order

6

Inspecting cooling system for leaks

AR20.00-D-1010C

Danger!

Risk of accident caused by vehicle starting off by itself when engine is running. Risk of injury caused by contusions and burns during starting procedure or when working near the engine as it is running

Secure vehicle to prevent it from moving by itself.
Wear closed and snug-fitting work clothes.
Do not touch hot or rotating parts.

AS00.00-Z-0005-01A

7

Inspect for oil leaks

Run engine until warm, switch off and inspect for leaks.

Engine lubrication, oil filter

Number

Designation

Engine 611.981/
983/987

Engine 612.981

BA18.20-P-1002-01G

Threaded cap to oil filter

Nm

25

25

Oil cooling system

Number

Designation

Engine 611.981/
983/987

Engine 612.981

BA18.30-P-1001-01C

Bolt, oil-water heat exchanger to timing case cover

Nm

14

14

Remove/install oil-water heat exchanger at oil filter

103 589 02 09 00

Wrench socket

Odkazované dokumenty