ar1540w5760b

Remove/install regulator for alternator

Typ ar · téma 15.40 · verze 0102 · 2012-02-22

Platí pro: ENGINE 541.9## ## up to 177213 in MODEL 950, 952, 953, 954 ENGINE 542.9## ## up to 177213 in MODEL 950, 952, 954

Není k dispozici v jazyce „cs“; zobrazeno v jazyce Angličtina.

Zařazení

Funkční skupina 1 Motor › 15 Elektrické zařízení motoru › 15.40 Generátor — Řada 950 · Řada 952 · Řada 953 · Řada 954

EinPAS 25 Palubní síť/síť/multifunkční systém › 25.20 Elektrická síť vozidla › 25.20.30 Alternátor — Řada 950 · Řada 952 · Řada 953 · Řada 954

Platí také pro motory/převodovky: 541 9**, 542 9**

AR15.40-W-5760B

Remove/install regulator for alternator

14.2.12

ENGINE 541.9## ## up to 177213 in MODEL 950, 952, 953, 954

ENGINE 542.9## ## up to 177213 in MODEL 950, 952, 954

Remove/install regulator for alternator

W15.40-1073-08

1 Cover

2 Electrical line

G2 Alternator

3 Bracket

4 Governor

Remove/install

1

Switch off ignition

Danger!

Risk of explosion caused by escaping oxyhydrogen gas. Risk of injury caused by caustic burns to eyes, skin and mucous membranes from battery electrolyte (contains diluted sulfuric acid) or metal spatter due to short circuit. Risk of burn injuries caused by short circuit. Risk of poisoning caused by swallowing battery electrolyte (contains diluted sulfuric acid) or absorption of lead over the skin or orifices

No fire, sparks, open flames or smoking.

Wear acid-resistant gloves and clothing and safety glasses with side guards.

Do not place any conductive objects on the battery and avoid any short circuit from battery positive to ground.

Only fill liquid battery electrolyte (diluted sulfuric acid) into suitable and appropriately marked containers.

AS54.10-Z-0001-01A

2

Disconnect ground line of battery

Notes on battery

AH54.10-P-0001-01A

3

Remove bottom soundproofing

4

Remove cable tie and cover (1) on alternator (G2)

5

Remove cable tie for electrical line (2) on bracket (3) and push electrical line (2) away from bracket (3)

6

Remove bracket (3) on ALT (G2)

*BA15.40-N-1012-01C

7

Remove regulator (4)

Installation: Check both slip rings in the alternator (G2) for score marks, if necessary:

Replace alternator (G2).

AR15.40-W-5032B

Check length of carbon brushes on regulator (4); replace regulator (4) if necessary.

AR15.40-W-5033-02B

*BE15.40-N-1001-02B

Replace gasket on control (4). Pay attention to installation position.

*BA15.40-N-1007-01C

8

Install in the reverse order

9

Synchronize tachograph

10

Reset clock

11

Code radio

Check values for regulator

Number

Designation

Engine
541.9, 542.9 up to end no. 177213

BE15.40-N-1001-02B

Length of carbon brushes

mm

5.0

Alternator

Number

Designation

Engine
541.9, 542.9
until end no.
177213

BA15.40-N-1007-01C

Bolt, regulator to alternator housing

M413

Nm

2

M419

Nm

3

BA15.40-N-1012-01C

Nut, bracket to alternator

Nm

5

Odkazované dokumenty