ar1530p7100ed

Remove starter, install

Typ ar · téma 15.30 · verze 0206 · 2012-02-16

Platí pro: ENGINE 112.910 in MODEL 202.026 /086 ENGINE 112.920 in MODEL 202.029 /089 ENGINE 112.915 in MODEL 202.088 ENGINE 112.940 in MODEL 208.365 /465 ENGINE 113.943 in MODEL 208.370 /470 ENGINE 113.984 in MODEL 208.374

Není k dispozici v jazyce „cs“; zobrazeno v jazyce Angličtina.

Zařazení

Funkční skupina 1 Motor › 15 Elektrické zařízení motoru › 15.30 Startér — Řada 202 (modely 026, 029, 086, 088, 089) · Řada 208 (modely 365, 370, 374, 465, 470)

EinPAS 15 Motor › 15.35 Startér › 15.35.20 Startér — Řada 202 (modely 026, 029, 086, 088, 089) · Řada 208 (modely 365, 370, 374, 465, 470)

Platí také pro motory/převodovky: 112 910, 112 915, 112 920, 112 940, 113 943, 113 984

AR15.30-P-7100ED

Remove starter, install

15.2.12

ENGINE 112.910 in MODEL 202.026 /086

ENGINE 112.920 in MODEL 202.029 /089

ENGINE 112.915 in MODEL 202.088

ENGINE 112.940 in MODEL 208.365 /465

ENGINE 113.943 in MODEL 208.370 /470

ENGINE 113.984 in MODEL 208.374

Remove starter, install

P15.30-0217-06

1 Electric cable circuit 30

2 Electric cable circuit 50

3 Bolts

4 Nut

M1 Starter

Modification notes

6.7.00

Value changed from 16 Nm to 14 Nm

Figure in BA15.30-P-1001-01A for engine 112, 113 modified

*BA15.30-P-1001-01A

6.7.00

Value changed from 10 Nm to 6 Nm

Figure in BA15.30-P-1002-01A for engine 112, 113 modified

*BA15.30-P-1002-01A

6.7.00

Value changed from 58 Nm to 42 Nm

Figure in BA15.30-P-1003-01A for engine 112, 113 modified

*BA15.30-P-1003-01A

Remove/Install

Danger!

Risk of explosion caused by escaping oxyhydrogen gas. Risk of injury caused by caustic burns to eyes, skin and mucous membranes from battery electrolyte (contains diluted sulfuric acid) or metal spatter due to short circuit. Risk of burn injuries caused by short circuit. Risk of poisoning caused by swallowing battery electrolyte (contains diluted sulfuric acid) or absorption of lead over the skin or orifices

No fire, sparks, open flames or smoking.

Wear acid-resistant gloves and clothing and safety glasses with side guards.

Do not place any conductive objects on the battery and avoid any short circuit from battery positive to ground.

Only fill liquid battery electrolyte (diluted sulfuric acid) into suitable and appropriately marked containers.

AS54.10-Z-0001-01A

1

Disconnect ground line from battery

Insulate clamping device of the ground line in order to prevent inadvertent contact with the ground point of the battery.

AR54.10-P-0003A

Notes on battery

AH54.10-P-0001-01A

2

Remove lower engine compartment paneling

AR61.20-P-1105AB

3

Remove right engine mount

Engine 112.915

Engine 112 except engine 112.915

AR22.10-P-1100AV

Engine 113

AR22.10-P-1100MV

4

Dismount electrical lines (1, 2), to do this, unscrew bolts (4)

Nut, terminal 30 connection

*BA15.30-P-1001-01A

Nut of connection circuit50

*BA15.30-P-1002-01A

5

Remove screws (3)

*BA15.30-P-1003-01A

6

Take starter (M1) down and out

7

Install in the reverse order

8

Perform function check

9

Render electrical system operational

Perform basic programming

AR00.19-P-0200C

Starter

Number

Designation

Engine
112 except 112.951, 113.94/
96/98

BA15.30-P-1001-01A

Nut of connection of circuit 30

Nm

14

BA15.30-P-1002-01A

Nut of connection circuit 50

Nm

6

BA15.30-P-1003-01A

Bolt of starter to crankcase

Nm

42

Odkazované dokumenty