1 | Screw |
T1/1 | Cylinder 1 ignition coil |
T1/2 | Cylinder 2 ignition coil |
T1/3 | Cylinder 3 ignition coil |
T1/4 | Cylinder 4 ignition coil |
T1/5 | Cylinder 5 ignition coil |
T1/6 | Cylinder 6 ignition coil |
a | Spark plug connector |
P15.10-2117-06
| Remove/install | ||
Warning | Risk of injury. Skin or eye injuries may result when handling hot or glowing objects. | Wear protective gloves, protective clothing and safety glasses, if necessary. | |
Danger | Risk of death when working on component parts and systems with U >= 30 V alternating voltage (AC) or U >= 60 V direct voltage (DC) | Do not touch damaged or defective live component parts and lines or non-insulated electrical connections and lines. | |
Topical note | Notes on avoiding damage to ignition system | ||
1 | Turn key in ignition lock (EIS control unit) to position "0" | ||
2 | Open engine hood and raise to vertical position | ||
3 | Remove air filter housing | ||
4 | Remove screws (1) of ignition coils for cylinders 1 to 6 (T1/1–T1/6) | Screw/bolt, ignition coil to cylinder head cover | |
5 | Detach ignition coils for cylinders 1 to 6 (T1/1–T1/6) with spark plug connectors (a) upwards and remove | ||
6 | Disconnect electrical connectors of ignition coils for cylinders 1 to 6 (T1/1–T1/6) | ||
7 | Install in the reverse order | ||
8 | Connect Star Diagnosis, read out fault memory and clear if necessary |
Odkazované dokumenty
- ah1510p000201v Upozornění k zamezení poškozením zapalovacího systému
- ar0910p1150va Demontáž, montáž pláště vzduchového filtru
- ar8840p1000v
- as0000z000201a Nebezpečí poranění kůže nebo očí při zacházení s horkými nebo žhavými předměty
- as0000z003501a Nebezpečí ohrožení života při pracích na součástech a systémech se střídavým napětím U >= 30 V (AC), resp. se stejnosměrným napětím U >= 60 V (DC)