ar8840p1000v

Opening engine hood, moving to upright position and closing

Typ ar · téma 88.40 · verze 0101 · 2010-12-20

Platí pro: MODEL 171.4, 172.4

Není k dispozici v jazyce „cs“; zobrazeno v jazyce Angličtina.

Zařazení

Funkční skupina 3 Nástavba › 88 Nástavbové díly, vnější víka › 88.40 Kapota motoru, čelní víko — Řada 171 (modely 4**) · Řada 172 (modely 4**)

EinPAS 35 Karoserie/rám/montované díly › 35.36 Kapota/víko/uzávěr › 35.36.30 Kapota motoru — Řada 171 (modely 4**) · Řada 172 (modely 4**)

AR88.40-P-1000V

Opening engine hood, moving to upright position and closing

8.12.10

MODEL 171.4, 172.4

Opening engine hood, moving to upright position and closing

P88.40-2425-07

Shown on model 171.4

1 Engine hood

3 Locking lever

2 Lever

Open

Danger!

Risk of injury caused by fingers being pinched or crushed when removing, installing or aligning hoods, doors, trunk lids, liftgates or sliding roof

Keep body parts and limbs well clear of moving parts.

AS00.00-Z-0011-01A

1

Pull lever (2) to release engine hood (1)

2

Press locking lever (3) upward and open engine hood (1)

Move to upright position

3

Push engine hood (1) upward at center (arrow) beyond dead center position of engine hood hinges and move to upright position

The engine hood (1) is moved and held in the vertical position by the spring force of the gas pressure struts.

Close

4

Press engine hood (1) down in center (arrow) and lock

5

Ensure that engine hood locks (1) properly

Odkazované dokumenty