Remove/install flywheel / drive plate

AR03.30-S-8001D

12.12.08

ENGINE 611.980 in MODEL 638.094 /194 /294
with CODE (MQ4) Engine OM611 DE22 LA (75 kW)
with CODE (MQ5) Engine OM611 DE22 LA (90 kW)

ENGINE 611.980 in MODEL 638.094 /194 with CODE (MQ3) Engine OM611 DE22 A (60 kW)

P03.30-2002-09

1 Retaining lock

2 Screw

3 Screw

6 Cylinder pin

10 Socket wrench

4 Flywheel / drive plate

5 Washer

	Remove/install
1	Remove manual transmission		AR26.10-S-0020B
2	Remove clutch		AR25.10-S-0050B
3	Install retaining lock (1) for crankshaft / starter ring gear		AR03.30-S-5000C
4	Unscrew screws (3)	 Installation: Do not use a bending rod to tighten for angular degrees in order to avoid any angle errors.
			*BA03.30-P-1005-01A
5	Remove flywheel/ driven plate (4)	 Flywheels do not need to be balanced and must not be interchanged.
		 The cylindrical pin (6) centers the flywheel (4) and the washer (5).
6	Install in the reverse order

 Flywheel, driven plate, vibration damper, starter ring gear

Number	Designation			Engine 611.980


BA03.30-P-1005-01A	Stretch-thread bolt for flywheel or two-mass flywheel to crankshaft	Stage 1	Nm	45
		Stage 2	 °	90