Install/remove retaining lock for the crankshaft/starter ring gear

AR03.30-P-5000GF

17.9.96

ENGINE 166.940 /960 /990 /995, 668.940 /941 /942 in MODEL 168

ENGINE 166.961 /991, 668.914 in MODEL 414.700

P03.30-0294-06

Retaining lock in starter opening

1 Retaining lock

M1 Starter

P03.30-2010-06

Retaining lock in the opening for the crankshaft position sensor

2 Retaining lock

L5 Crankshaft position sensor

Fig. item, etc.	Working instructions
 1	Retaining lock	Insert through the starter opening into the starter ring gear; rotate engine at crankshaft if necessary	*166589004000
	Remove/install starter	Model 168	AR15.30-P-7100GF
		Model 414.600/700	AR15.30-L-7100VA
 2	Retaining lock (only for small loads)	Insert crankshaft position sensor through the opening into the segment ring on the flywheel; rotate engine at crankshaft if necessary.	*166589014000
	Install/remove crankshaft position sensor	Model 168	AR15.12-P-2133GF
		Model 414.600/700	AR15.12-L-2133VA

166 589 01 40 00

Retaining lock

166 589 00 40 00