Remove/install trim panel of cylinder head cover

AR01.20-P-5015M

Remove/install trim panel of cylinder head cover

15.12.09

 

Remove/Install

1

Turn key in electronic ignition switch control module in position "0"

Vehicles with Keyless-Go Code 889: press Start/Stop button repeatedly until ignition is switched off.

2

Open engine hood and raise to vertical position

AR88.40-P-1000M

3

Remove air cleaner housing

AR09.10-P-1050M

4

Remove front engine cover (1)

AR01.10-P-2405M

5

Remove left or right hot film mass air flow sensor (B2/6, B2/7) with air intake pipe

AR07.07-P-1454M

6

Take out left or right noise insulation (2)

7

Unscrew bolt (3a) of charge air intake pipe (3) to cylinder head



*BA09.41-P-1013-01H

8

Unscrew bolts (4) and take out left or right trim panel (4a, 4b) of cylinder head cover

 Slacken trim panels (4a, 4b) with rubber hammer from cylinder head cover.



*BA01.20-P-1007-01G

9

Install in the reverse order

Number

Designation

Engine 628.960/963

BA09.41-P-1013-01H

Bolt of charge air intake manifold to cylinder head cover

NM

9

Number

Designation

Engine
628.960/961/
962/963

BA01.20-P-1007-01G

Screw of trim panel to cylinder head cover

NM

9