ar8840p1000m

Opening engine hood, moving to upright position and closing

Typ ar · téma 88.40 · verze 0104 · 2019-12-03

Platí pro: Model 215, 220

Není k dispozici v jazyce „cs“; zobrazeno v jazyce Angličtina.

Zařazení

Funkční skupina 3 Nástavba › 88 Nástavbové díly, vnější víka › 88.40 Kapota motoru, čelní víko — Řada 215 · Řada 220

EinPAS 35 Karoserie/rám/montované díly › 35.36 Kapota/víko/uzávěr › 35.36.30 Kapota motoru — Řada 215 · Řada 220

AR88.40-P-1000M

Opening engine hood, moving to upright position and closing

18.11.2019

Model

215, 220

Opening engine hood, moving to upright position and closing

Shown on model 220

1

Lever

2

Handle

3

Locking lever

P88.40-2008-06

Danger

Risk of death when working on component parts and systems with U >= 30 V alternating voltage (AC) or U >= 60 V direct voltage (DC)

Do not touch damaged or defective live component parts and lines or non-insulated electrical connections and lines.

AS00.00-Z-0035-01A

Open

1

Pull release lever (1) in driver's footwell to release engine hood

Handle (2) will spring out of the radiator trim; raise the hood slightly if necessary

2

Pull handle (2) out of the radiator trim as far as it will come and open the hood


Do not
lift it by the handle

Move to upright position

3

Push locking lever (3) on the right engine hood hinge in the direction of the arrow and push the hood downwards slightly so that the locking lever does not engage. Repeat the procedure on the left engine hood hinge and move the hood into the vertical position

Close

4

Push locking lever (3) on the right engine hood hinge in the direction of the arrow, and close the hood until locking levers (3) engage

5

Close hood. Place your hands only on the edges of the hood.


After closing the hood, check the hood's locking function.
To do so, pull the engine hood up abruptly

Odkazované dokumenty