Workshop equipment
WE58.40-Z-1036-11A | Transmission support |
P01.10-2332-01
1 Install support plate (1) with torque converter support wedge (1.1) in upper part (2) of transmission support as shown in the diagram.
The knurled nut (1.2) on the support plate must be at the top end of the threaded spindle, as shown in the diagram.
P01.10-2333-01
2 Remove cover on forward access hole on transmission bell.
3 Fit upper part (2) of transmission support with support plate (1) on frame crossmember.
The torque converter support wedge must engage in the access hole in the transmission bell, and the chamfered side must be touching the torque converter.
4 Fit bottom part (3) of transmission support and secure with clamp screw (3.1).
P01.10-2334-01
5 Use the knurled nut to adjust the support plate to the position of the transmission and simultaneously move the transmission so that the torque converter support wedge noticeably touches the torque converter (arrow).
For reasons of clarity, the diagram shows the position of the torque converter support wedge with the engine removed. The torque converter support wedge holds the torque converter in its installation position when the engine and transmission are separated.