Replace brake fluid · ap4200p4280a · Mercedes-Benz WIS

Odkazované dokumenty

AP42.00-P-4280A

Replace brake fluid

2.11.11

MODEL 129 with ENGINE 119, 120 with CODE (472) Electronic Stability Program (ESP)

MODEL 140 with CODE (472) Electronic Stability Program (ESP)

MODEL 210 with ENGINE 119 with CODE (472) Electronic Stability Program (ESP)

P42.31-0254-09

1 Right rear brake caliper

2 Left rear brake caliper

3 Right front brake caliper

4 Left front brake caliper

10 Reservoir

12 Return flow pipe

13 Hose piece

087 Hand-held tester

094 Test cable

X11/4 Diagnostic socket (38-pin)

Picture item, etc.	Work instructions
 Danger!	Risk of poisoning caused by swallowing brake fluid. Risk of injury caused by brake fluid coming into contact with skin and eyes.	Only pour brake fluid into suitable and appropriately marked containers. Wear protective clothing and eye protection when handling brake fluid.	AS42.50-Z-0001-01A
	Brake fluid notes	All models	AH42.50-P-0001-01A
	Notes on repairs to brake system	All models	AH42.00-P-0003-01A
1	Note fluid level of brake fluid reservoir (10).
2	Unscrew cap
3	Empty chambers in the brake fluid reservoir (10) so that the base is still covered	 Do not drain brake fluid reservoir (10) completely.
4	Fill up reservoir (10) with new brake fluid
5	Disconnect return line (12) from reservoir (10)
6	Connect hose fitting (13) to return line
7	Connect handheld tester (087) with test cable (Multiplexer) (094) to the diagnostic data link connector (X11/4)	Handheld tester (087)
		Test cable (multiplexer) (094)
8	Switch on ignition
9	Actuate precharging pump with handheld tester (087) and pump brake fluid out of the precharging circuit into a vessel until the reservoir (10) is emptied so that the base is still covered
10	Connect brake fluid changing equipment	 Follow the operating instructions for brake fluid changing equipment.
		Brake fluid change unit gotis://B_42/43.2_01
		 Brake fluid	*BF42.10-P-1001-01A
11	Carry out the bleeding process as per the instructions in the handheld tester display: Bleed menu item brake system	 Allow approx. 80 cm³ to flow out of each brake cylinder.
		Front axle, model 129, 140:
		 Bleed screw to brake caliper	*BA42.10-P-1002-10I
		Front axle model 210:
		 Bleed screw to brake caliper	*BA42.10-P-1002-10F
		Rear axle, model 129, 140:
		 Bleed screw to brake caliper	*BA42.10-P-1002-12I
		Rear axle model 210:
		 Bleed screw to brake caliper	*BA42.10-P-1001-12F
		 Brake fluid	*BF42.10-P-1001-01A
12	Brake fluid changing equipment, and check brake fluid level, fill up if necessary in accordance with the level noted beforehand

 Front axle brake caliper

 Front axle brake caliper

Number	Designation			Model 210


BA42.10-P-1002-10F	Bleed screw to brake caliper	M8	Nm	7

 Rear axle brake caliper

Number	Designation		Model 129	Model 140


BA42.10-P-1002-12I	Bleed screw to brake caliper	Nm	7	7

 Rear axle brake caliper

Number	Designation		Model 210


BA42.10-P-1001-12F	Bleed screw to brake caliper	Nm	7

 Brake fluid

Number	Designation			Model 129	Model 140


BF42.10-P-1001-01A	Brake fluid	Filling capacity	Liters	0.45 to 0.6	0.7...0.9
		Specifications for Operating Fluids	Sheet	BB00.40-P-0330-01A	BB00.40-P-0330-01A
			Sheet	BB00.40-P-0331-00A	BB00.40-P-0331-00A

 Brake fluid

Number	Designation			Model 210


BF42.10-P-1001-01A	Brake fluid	Filling capacity	Liters	0.45 to 0.6
		Specifications for Operating Fluids	Sheet	BB00.40-P-0330-01A
			Sheet	BB00.40-P-0331-00A

140 589 03 09 00

Socket wrench

Designation

Model
140 without special protection

Model
140 with
special protection

BA42.10-P-1002-10I

Bleed screw to brake caliper

ah4200p000301a Pokyny k opravám brzdové soustavy
ah4250p000101a Upozornění k brzdové kapalině
as4250z000101a Nebezpečí otravy při požití brzdové kapaliny. Nebezpečí poranění při kontaktu brzdové kapaliny s kůží a očima