ap3325p3352m

Check front axle carrier for signs of damage

Typ ap · téma 33.25 · verze 0102 · 2010-07-29

Platí pro: MODEL 220 with CODE (Z07) Top protection

Není k dispozici v jazyce „cs“; zobrazeno v jazyce Angličtina.

Zařazení

Funkční skupina 2 Podvozek › 33 Přední náprava › 33.25 Těleso nápravy, těhlice — Řada 220

EinPAS 17 Hnací ústrojí/náprava › 17.50 Přední náprava › 17.50.50 Skříň/nosná trubka/můstek/nosník/roura hnacího hřídele — Řada 220

AP33.25-P-3352M

Check front axle carrier for signs of damage

27.7.10

MODEL 220 with CODE (Z07) Top protection

Check front axle carrier for signs of damage

P33.25-2053-08

1 Fastening shackle

3 Front axle carrier

2 Mounting plate

Removing

Danger!

Risk of death caused by vehicle slipping or toppling off of the lifting platform.

Align vehicle between columns of vehicle lift and position four support plates at vehicle lift support points specified by vehicle manufacturer.

AS00.00-Z-0010-01A

1

Raise vehicle with vehicle lift

2

Dismantle temperature sensor for engine fire extinguishing system from lower engine compartment paneling

Vehicles with fire extinguishing system

Nonobservance may result in activation of fire extinguishing system!

Remove/install fire extinguishing system temperature sensor

Model 220.1/8 up to 14.4.04 with fire extinguishing system

AR86.10-P-0102MBA

Model 220.1/8 as of 15.4.04 with fire extinguishing system

AR86.10-P-0102MBC

3

Remove bottom engine compartment paneling

Remove/install bottom engine compartment paneling

AR61.20-P-1105M

Clean

4

Clean left and right mounting bracket (1) as well as fastening plate (2)

Cleaner from package

*BR00.45-Z-1028-04A

Checking

5

Check left and right mounting bracket (1) on the front axle carrier (3)

Visual inspection for signs of cracks, damage and deformation.
If defective, replace front axle carrier (3) subject to separate repair order:

Remove/install front axle carrier.

AR33.10-P-0001M

6

Check fastening plate (2)

Visual inspection for signs of cracks, damage and deformation.
If defective, replace fastening plate (2) subject to separate repair order, refer to Remove/install rack-and-pinion steering:

Model 220.175

AR46.20-P-0600I

Model 220.176

AR46.20-P-0600M

7

Apply wax preservative to mounting brackets (1) and fastening plate (2)

Wax preservative, spray can

*BR00.45-Z-1018-05A

Install

8

Install lower engine compartment paneling

Remove/install bottom engine compartment paneling

AR61.20-P-1105M

9

Mount temperature sensor for engine fire extinguishing system

Vehicles with fire extinguishing system

Remove/install fire extinguishing system temperature sensor

Model 220.1/8 up to 14.4.04 with fire extinguishing system

AR86.10-P-0102MBA

Model 220.1/8 as of 15.4.04 with fire extinguishing system

AR86.10-P-0102MBC

10

Lower vehicle

Repair materials

Number

Designation

Order number

BR00.45-Z-1028-04A

Cleaner from package

Adolf Würth GmbH & Co. KG
Reinhold-Würth-Str. 12-17
74653 Künzelsau-Gaisbach
Germany
Tel. +49 7940 15-0
Fax +49 7940 15-1000
www.wuerth.de

BR00.45-Z-1018-05A

Wax for the engine compartment (400 ml spray can)

A 000 986 33 70 10

Odkazované dokumenty