N32.25-2010-01
Vehicles with metal suspension | ||||
Leaf springs | ||||
Vehicles fitted with air suspension | ||||
Air spring bellow | ||||
Support base | ||||
B32.20-0006-01
| Check | ||
1 | Check the blades of the leaf springs for the misalignment of the mounting position, cracks and damage | In vehicles with mechanical suspension: | |
| |||
Follow work steps 1 and 2. | |||
Align the misaligned blades and/or replace broken blades with separated invoicing. | |||
2 | Check spring clips and brackets for fixture and conditions | If necessary: | |
| |||
Replace at extra charge. | |||
| Check | ||
3 | Check the bellows pneumatic suspension for damage and wear | In vehicles fitted with pneumatic suspension: | |
| |||
Follow work steps 3, 4, 5, 6, 7 and 8. | |||
Replace the damaged pneumatic suspension bellows (cracks, cuts, friction points) with separate invoicing. | |||
4 | Detach and engage the suspension control valve lever upwards so that the bellows from suspension gets inflated | ||
5 | Examine any impurities located on the side of the pneumatic bellows base | ||
6 | Trigger the lever of the suspension height adjustment valve down to expel the air and check the seat of the pneumatic bellows on the support base | The air bellows should not be twisted. | |
7 | Fit the suspension height adjustment valve lever | ||
8 | Do the same for all bellows air suspension |