ap2000p2015oa

Check coolant level for 48 V on-board electrical system coolant circuit

Typ ap · téma 20.00 · verze 0100 · 2020-09-12

Platí pro: Engine 176, 256, 656 in model 223 with code B01 (48V technology)

Není k dispozici v jazyce „cs“; zobrazeno v jazyce Angličtina.

Zařazení

Funkční skupina 1 Motor › 20 Chlazení motoru › 20.00 Všeobecné — Řada 176 · Řada 223 · Řada 656

EinPAS 15 Motor › 15.25 Chladicí systém motoru › 15.25.5 Kompletní okruh chlazení — Řada 176 · Řada 223 · Řada 656

Platí také pro motory/převodovky: 256 ***

AP20.00-P-2015OA

Check coolant level for 48 V on-board electrical system coolant circuit

08.09.2020

Engine

176, 256, 656 in model 223

with code B01 (48V technology)

Check coolant level for 48 V on-board electrical system coolant circuit

Shown on engine 256.9 in model 223.163

1

Cap

2

48 volt on-board electrical system coolant circuit coolant expansion reservoir

P20.00-A062-76

Danger

Risk of death when working on component parts and systems with U >= 30 V alternating voltage (AC) or U >= 60 V direct voltage (DC)

Do not touch damaged or defective live component parts and lines or non-insulated electrical connections and lines.

AS00.00-Z-0035-01A

Warning

Risk of injury to skin and eyes suffering scalding from contact with hot coolantspray. Risk of poisoning from swallowing coolant.

Do not open cooling system unless coolant temperature is below 90 °C. Open cap slowly and release the pressure. Do not pour coolant into beverage containers.
Wear protective gloves, protective clothing and safety glasses.

AS20.00-Z-0001-01A

Topical note

General information on vehicles with high-voltage on-board electrical system and/or lithium-ion battery and/or gaseous-fuel drive system as well as personal protective equipment

AH00.00-Z-0300-01A

Topical note

Notes on coolant

AH20.00-N-2080-01A

Remove

1

Unscrew cap (1) from coolant circuit coolant expansion reservoir for 48 volt on-board electrical system (2).

Check

2

Check coolant level.

With a cold engine, the coolant level must reach the marking (arrow) in the coolant circuit coolant expansion reservoir of the 48 V on-board electrical system (2). When coolant is warm: approx. 1  cm (0.39  inch) above marking.

If the coolant level is too low,

Check cooling system for leak tightness and coolant for antifreeze content.

Coolant specifications

BB00.40-P-0310-01A

After obtaining special order.

Install

3

Use cap (1).to seal coolant circuit coolant expansion reservoir for 48 volt on-board electrical system (2).

Odkazované dokumenty